Messages 36201 - 36600

Jump to:

EDA36250 INVALID BUSINESS WEEK SPECIFICATION: %1

EDA36300 CANNOT COMPUTE PERCENT DIFFERENCE AS DATA CROSSES ZERO

EDA36350 PRODUCT POSITION CHART NEEDS GROUPS OF 3 YAXIS COLUMNS

EDA36201 COMMAND "%1" SYNTAX ERROR "%2" IS NOT NUMERIC

THE PARAMETER LISTED MUST BE NUMERIC.

EDA36202 COMMAND "%1" REQUIRES %2 PARAMETER(S), %3 SUPPLIED

THE INVOCATION OF THE LISTED COMMAND WAS NOT CORRECT. THE MINIMUM NUMBER OF PARAMETERS WAS NOT SUPPLIED.

EDA36203 COMMAND "%1" ACCEPTS %2 TO %3 PARAMETERS(S)

THE INVOCATION OF THE LISTED COMMAND WAS NOT CORRECT. THE MAXIMUM NUMBER OF PARAMETERS THAT MAY BE SUPPLIED WAS EXCEEDED.

EDA36204 COMMAND WORD NOT PRESENT

A COMMAND WAS NOT SUPPLIED.

EDA36205 DIALOG MANAGER COMMAND "&1", WILDCARD REQUESTS INVALID

THE LISTED DIALOG MANAGER COMMAND DOES NOT ACCEPT AN "*" AS AN ENDING CHARACTER FOR ITS PARAMETERS.

EDA36206 ALL DATA MISSING--GRAPH SUPPRESSED

The data values for all points to be plotted on the graph were "missing". Accordingly, no graph was displayed.

EDA36207 DECIMAL OVERFLOW--FIELD SET TO MAXIMUM

During an aggregation (SUM), the result of an ADD DECIMAL instruction exceeded the capacity of the field. The magnitude of the field has been set to 99..99 (the sign is unchanged), and the corresponding count has been frozen.

EDA36208 METHODS-> SYNTAX ERROR "%1"

SYNTAX ERROR IN METHOD SPECIFICATION. THE NAME MAY BE TOO LONG, OR THE EVENT OR ORDER MAY NOT BE VALID.

EDA36209 METHODS-> ILLEGAL COMBINATION "%1"

METHODS HAVE SPECIFIC EVENT AND ORDER COMBINATIONS. VALID COMBINATIONS ARE DIFFERENT FOR FILES, SEGMENTS & FIELDS.

EDA36210 THE SPECIFIED PARAMETER CAN ONLY BE SET ON TABLE:

The specified parameters can only be set during a TABLE request using ON TABLE SET.

EDA36211 TARGET_OF keyword specifies an invalid value: %1

The TARGET_OF keyword must specify an index file previously mentioned as the location for a multidimensional index.

EDA36212 A FIELD QUALIFIER IS NOT A UNIQUE SEGMENT.

A cascaded field reference contains a segment qualifier that is not a unique segment.

EDA36213 A FIELD QUALIFIER IS NOT A CROSS-REFERENCE FIELD.

A cascaded field reference contains a field that is not a valid cross-reference field.

EDA36214 A CASCADED FIELD REFERENCE REFERS TO MORE THAN ONE FIELD

EDA36215 A CASCADED FIELD REFERENCE CANNOT BE RESOLVED.

EDA36216 A FIELD QUALIFIER IS NOT RECOGNIZED.

A cascaded field reference contains a qualifier that is neither a valid segment name nor a valid field name.

EDA36217 INCOMPLETE ON TABLE SET SYNTAX

The correct syntax is: ON TABLE SET parameter value <AND parameter value ... >.

EDA36218 AN EQUAL SIGN (=) IS INVALID IN ON TABLE SET

The correct syntax is: ON TABLE SET parameter value <AND parameter value ... >.

EDA36219 AN ERROR OCCURED WHEN OPENING FILE:

EDA36220 WARNING: PRINTPLUS DISABLED FOR THIS REPORT, REASON:

REASON: 1 - Unknown Style for PRINTPLUS. REASON 2 - TEXT field detected in FOOTERs/HEADERs. REASON 3 - Insufficient memory. REASON 4 - Insufficient space on the report page.

EDA36221 WARNING: FASTHOLD IS DISABLED, REASON:

REASON: 1 - Insufficient memory. REASON 2 - FAST HOLD was not set up properly.

EDA36222 FILENAME NOT SPECIFIED FOR -HTMLFORM

A file name must be specified after the -HTMLFORM command.

EDA36223 FILENAME %1 SPECIFIED BY -HTMLFORM COULD NOT BE FOUND

The file name specified following the -HTMLFORM command could not be found.

EDA36224 UNKNOWN KEYWORD <%1> FOUND FOLLOWING WEBFOCUS HTML COMMAND

An unknown keyword was encountered following the WEBFOCUS HTML command. Valid keywords are TABLE or VAR.

EDA36225 UNABLE TO OPEN FILE %1 SPECIFIED BY WEBFOCUS TABLE

The file specified by the WEBFOCUS TABLE HTML syntax could not be found or if found it could not be opened.

EDA36226 NO FILENAME SPECIFIED AFTER WEBFOCUS TABLE

A file name is required after the WEBFOCUS TABLE syntax.

EDA36227 VARIABLE NAME %1 FOR WEBFOCUS VAR IS GREATER THAN 12 CHARACTERS

Amper variable names are limited to 12 characters.

EDA36228 VARIABLE %1 SPECIFIED BY WEBFOCUS VAR HAS NEVER BEEN SET

The amper variable mentioned in the error was never given a value and therefore cannot be substituted in the HTML line.

EDA36229 UNABLE TO ALLOCATE MEMORY TO PROCESS WEBFOCUS HTML COMMAND

The -HTMLFORM processor was unable to allocate memory in order to execute a WEBFOCUS HTML command.

EDA36230 UNABLE TO LOCATE END OF COMMENT IN WEBFOCUS HTML COMMAND

Each WEBFOCUS HTML command is enclosed in an HTML comment. An open comment followed by a WEBFOCUS HTML command but the end of the comment could not be located.

EDA36231 TSO commands cannot be used against a FastHold File.

A TSO command, such as List, was issued against a DDNAME that refers to a FastHold file. Since FastHold files exist only in FOCSORT, and not on DASD, TSO cannot access the FastHold data. You can set FastHold to Off and reissue the TSO command.

EDA36232 UNABLE TO LOCATE END OF !IBI ESCAPE SEQUENCE.

Each !IBI escape sequence must be terminated by a semicolon.

EDA36233 -HTMLFORM IS NOT SUPPORTED IN CURRENT MODE.

-HTMLFORM can only be used through EDA/SQL or the FOCUS interactive Gateway.

EDA36234 -HTMLFORM END WAS ISSUED WITHOUT -HTMLFORM BEGIN.

EDA36235 THE "AS" KEYWORD WAS NOT SPECIFIED FOLLOWING A "SAVE".

EDA36236 EXECUTION HALTED DUE TO ATTEMPT TO USE RECURSIVE LET:

A recursive LET command is in effect which will cause a loop in FOCUS. The command containing the LET won't be executed. An example can be -SET &F='X'; LET &F=TSO FREE; FREE=&F; END. Using FREE in a command such as DYNAM FREE FILE OFFLINE would cause a loop.

EDA36237 SYNTAX ERROR SETTING FILTER

The valid syntax for activating/deactivating FILTERs : SET FILTER = filter-name-list IN file [ON/OFF] filter-name-list := * := filtername [, filter-name-list].

EDA36238 ILLEGAL KEYWORD FOLLOWS PCSEND

One of the following keywords should follow PCSEND:USER, FILE, FIELD or LOCATION.

EDA36239 NO PATH NAME FOUND FOLLOWING LOCATION KEYWORD

EDA36240 THE ON FIELD IS NOT THE FIRST BY FIELD

EDA36241 FILTERS DON'T EXIST FOR FILE NAMED:

EDA36242 FILTER DOESN'T EXIST:

EDA36243 NAME OF FILTER EXCEEDS 8 CHARACTERS:

EDA36244 DUPLICATE FILTER'S NAME:

EDA36245 THE DISTRIBUTION LIST CANNOT BE FOUND

EDA36246 NO HOST NAME FOR FTP

EDA36247 NO USER NAME FOR FTP

EDA36248 NO PASSWORD FOR FTP

EDA36249 RECURSIVE -INCLUDES ARE NOT ALLOWED

The -INCLUDE dialogue manager directive may not include the same file recursively (either directly or indirectly).

EDA36250 INVALID BUSINESS WEEK SPECIFICATION: %1

Business week must be specified in form SMTWTFS with '_' for non-business day. (Example: _MTWTF_ ).

EDA36251 SYNTAX ERROR IN LIKE OPERATOR

Alphanumeric mask must follow LIKE operator. Optional keyword ESCAPE followed by a single character alphanumeric constant in apostrophes can be used after the mask.

EDA36252 FILE EMBEDDED IN HTML PAGE HAS SAME NAME AS PAGE

EDA36253 Remote Destination --> %1

EDA36254 Remote Service --> %1

EDA36255 Remote User ID --> %1

EDA36256 Remote Node --> %1

EDA36257 Remote CGI Path --> %1

EDA36258 Remote Password --> %1

EDA36259 Looking for server.

EDA36260 Sending request to remote system.

EDA36261 Waiting for server reply.

EDA36262 Server not found

EDA36263 Insufficient memory for independent path cache.

There is not enough memory to build a cache for independent paths. Processing will proceed as if MULTIPATH were SIMPLE.

EDA36264 A segment's active fields are larger than the cache limit.

One segment has more then 32K bytes of active data. Processing will proceed as if MULTIPATH were SIMPLE.

EDA36265 An unexpected error return from independent path cache.

Please run with SET TRACEON=NCACHE for more debugging information. Processing will proceed as if MULTIPATH were SIMPLE.

EDA36266 An unrecoverable error occurred in NCACHE:

Please run with SET TRACEON=NCACHE for more debugging information. Request is terminated.

EDA36267 Insufficient FOCSORT pages available for path cache.

Increase the size of your FOCSORT space.

EDA36268 Reserved for testing on independent paths.

EDA36269 Reserved for testing on independent paths.

EDA36270 PLEASE USE RUN REMOTE

The data for this procedure is stored remotely. The procedure cannot be run locally.

EDA36271 INVALID CROSS-REFERENCE STORED IN MASTER.

A cross-reference stored in the master can only be used with FOCUS or FUSION files.

EDA36272 Web User ID --> %1

EDA36273 Web Password --> %1

EDA36274 Remote MR Base Dir --> %1

EDA36275 -HTMLFORM BEGIN WITHOUT -HTMLFORM END

EDA36276 FORMAT NOT SUPPORTED.

SVG and PNG formats are supported with your current GRAPHENGINE setting.

EDA36277 SET LOOKGRAPH HAS AN INVALID PARAMETER.

EDA36278 Request is cancelled

EDA36279 NON-HANDLED DATA FOUND IN FILE %1

EDA36280 FILE WITH SUFFIX=FOC CAN NOT BE READ BY ANALYSE

EDA36281 NO DATA FOUND FOR FILE= %1

EDA36282 NON-NUMERIC DATA FOUND IN FILE %1

EDA36283 ERROR...ZERO RECORDS SELECTED

EDA36284 SELECTION TEST ERROR

EDA36285 FIELD %1 HAS FORMAT %2, SPECIFY USAGE FORMAT %3

EDA36286 WARNING - END OF FILE ENCOUNTERED AFTER %1 RECORDS

EDA36287 INSUFFICIENT CORE FOR SAVING ALPHANUMERIC DATA

EDA36288 ERROR...UNSUPPORTED DATA CONVERSION FROM EXTERNAL FILE

EDA36289 CAN'T ESTIMATE PARMS FOR %1 VARS WITH ONLY %2 OBSERVATIONS

EDA36290 NUMBER OF NON-MISSING OBSERVATIONS LESS THAN 3

EDA36291 NON-MISSING OBSERVATIONS MUST BE GT NUMBER OF VARS + 1

EDA36292 NOT ENOUGH MEMORY SPACE...REGRESSION TERMINATED

EDA36293 SINGULAR MATRIX, OR NEGATIVE RESIDUAL SUM OF SQUARES

EDA36294 NUM OF VARS MUST BE GT OR EQUAL TO THE NUM OF GROUPS

EDA36295 NUMBER OF GROUPS MUST BE GREATER THAN 1

EDA36296 INDEPENDENT VARIABLES ARE NOT INDEPENDENT

The independent variable matrix is singular. Use step-wise regression (STEPR)...MULTR terminated.

EDA36297 MISSING VALUE IN BASE PERIOD

EDA36298 BACK-EXTRAPOLATION ATTEMPTED BEYOND FIRST TIME VALUE

EDA36299 INSUFFICIENT DATA FOR EXTRAPOLATION

EDA36300 CANNOT COMPUTE PERCENT DIFFERENCE AS DATA CROSSES ZERO

EDA36301 ALPHANUMERIC DATA CANNOT BE SMOOTHED

EDA36302 NO VALUES AVAILABLE YET

EDA36303 ALPHA MUST BE GREATER THAN 0 AND LESS THAN 1; 0.1 IS SUGGESTED

EDA36304 NO FILTERS IN EFFECT FOR FILE NAMED %1

EDA36305 APPROOT IS NOT DEFINED. APP COMMANDS ARE DISABLED

EDA36306 APPLICATION %1 ALREADY EXISTS. RUN DELETE FIRST

EDA36307 APPLICATION %1 DOES NOT EXIST.

EDA36308 SET %1 IS DISABLED WHEN APP IS ENABLED

App disable should be issued to run this command.

EDA36309 APP COMMAND "%1" IS NOT PERMITTED WHEN APP IS DISABLED

App enable should be issued prior to running this command.

EDA36310 ERROR. HOLD CANNOT BE USED AS AN APPLICATION NAME

EDA36311 WHERE IN JOIN MUST BE TERMINATED BY SEMICOLON (;)

EDA36312 DEFAULT APPLICATION DIRECTORY IS:

EDA36313 ERROR CREATING APPLICATION %1

EDA36314 Invalid User Name or Password, please enter again.

EDA36315 DELETE APPLICATION %1 ERROR

EDA36316 WHERE-BASED JOIN FROM NON-FOCUS TO FOCUS NOT SUPPORTED.

EDA36317 FOCEXEC NAME IS INVALID WHEN APP ENABLED: %1

EDA36318 MAP NAME: %1 ALREADY USED. USE "APP MAP %1" TO UNMAP

EDA36319 RECURSIVE WHERE BASED JOIN: ONLY FOCUS FILES SUPPORT

EDA36320 FORECAST SYNTAX ERROR

EDA36321 DATE INCREMENT TYPE FOR FORECAST IS NOT APPLICABLE:

The increment unit for a data cannot be smaller than the minimal component in the format of the sort field.

EDA36322 ON FIELD IS NOT LAST BY OR ACROSS FIELD

FORECAST request can be only performed on the last ACROSS field. If ACROSS is not specified, then on last BY field.

EDA36323 EXPRESSIONS ARE NOT PERMITTED IN PARAMETERS

In a FORECAST/REGRESS, parameters cannot be presented as expressions but only as fields or constants.

EDA36324 VERB OBJECT OR INTERVAL CANNOT BE A QUOTED CONSTANT

All parameters of FORECAST/REGRESS except 'method' should not contain quotes.

EDA36325 FORECAST/REGRESS VERB OBJECT IS NOT RECOGNIZED

The verb object is not found in either a master file or a prior DEFINE section or a COMPUTE statement.

EDA36326 INTERVAL OR NUMBER IS NOT CONVERTED AS ASSUMED TYPE

In a FORECAST request, parameter 'interval' must have the type of the field that it effects. Parameters 'npoint', and 'npredict' must be a positive whole number.

EDA36327 MATHEMATICAL METHOD IS NOT RECOGNIZED

In a FORECAST request, only three method functions can be used in a 'method' parameter. They are 'REGRESS', 'MOVAVE', and 'EXPAVE'.

EDA36328 INCORRECT USE OF NUMERIC FORECAST PARAMETERS

In a FORECAST/REGRESS request, a numeric parameter such as 'npredict', 'interval, or 'npoint' is either non-positive or exceeds an allowed limit.

EDA36329 INVALID FORECAST REQUEST: PRINT/LIST with ACROSS

It is illegal to use FORECAST together with an ACROSS phrase when the command is LIST or PRINT. Only the SUM command can be used in this case.

EDA36330 INTERNAL FORECAST/REGRESS REQUEST ERROR

An unforeseen error has occurred in routines for the FORECAST/REGRESS feature. Perhaps the FORECAST parameter list has an extra parameter or other syntax error.

EDA36331 CANNOT DELETE FILE %1

EDA36332 CANNOT EXECUTE: %1

EDA36333 INVALID FORECAST/REGRESS REQUEST

'MORE', 'OVER', 'GRAPH', 'MODIFY', 'FOR', and 'BY TOTAL', as well as reformatting into nonnumeric fields, are not permitted in a FORECAST/REGRESS request.

EDA36334 FORECASTED FIELD CANNOT BE A SORT FIELD

A field containing forecasted values cannot be a BY or ACROSS field.

EDA36335 PARAMETER LENGTHE CONFLICT IN FUNCTION "%1", ARG%2.

The parameter length of a user function or a directive is either below or above enforced limits or conflicts with the length provided as a constant in another parameter.

EDA36336 CANNOT DELETE APPLICATION %1 IN ACTIVE PATH

EDA36337 CANNOT RENAME APPLICATION %1 IN ACTIVE PATH

EDA36338 FILE %1 DOES NOT EXIST

EDA36339 ERROR ISSUING FILEDEF: DDNAME %1 IS NATIVELY ALLOCATED

A filedef could not be completed because the DDNAME is already natively allocated. On S390/USS, this means the DDNAME was either allocated in the JCL or via DYNAM.

EDA36340 INCORRECT USE OF FORECAST, INVALID FIELD PROVIDED

FORECAST request does not support the date format used or is not in the correct context ('ON field RECAP').

EDA36341 INCORRECT USE OF PARAMETERS FOR REGRESSION

The presence of keys equal or preceding the 'ON field' in regression parameter list as well as reusing parameters in the list is not allowed.

EDA36342 FORECAST/REGRESS RESERVED MESSAGE3

EDA36343 FORECAST/REGRESS RESERVED MESSAGE2

EDA36344 FORECAST/REGRESS RESERVED MESSAGE1

EDA36345 NORMSINV: argument is out of scope

Valid argument values are between 0 (zero) and one (1). Result is undefined.

EDA36346 INCORRECT USE OF DATE-TIME FIELD OR CONSTANT

Date-time fields and constants cannot be used with alphanumeric type of operations such as concatenation, EDIT, or CONTAINS/OMITS.

EDA36347 FDT OVERFLOW FOR MASTER %1 : %2

There is a limit to the total number of segments and indices that can exist in a Master. Please check the iWay documentation for exact limits.

EDA36348 INVALID FORMAT

Format provided is not recognized. Reporting terminated.

EDA36349 GANTT CHART MUST HAVE SIX Y AXIS COLUMNS

EDA36350 PRODUCT POSITION CHART NEEDS GROUPS OF 3 YAXIS COLUMNS

EDA36351 MAXIMUM NUMBER OF FOLD-LINE CLAUSES EXCEEDED

A maximum of 16 FOLD-LINE clauses are allowed in a request.

EDA36352 MULTI3Y CHARTS NEED AT LEAST THREE YAXIS COLUMNS

EDA36353 PARETO CHARTS CAN ONLY HAVE ONE YAXIS COLUMN

EDA36354 RESOURCE RETURN CHARTS CAN ONLY HAVE TWO YAXIS COLUMNS

EDA36355 INVALID TYPE OF ARGUMENT #%1 FOR USER FUNCTION %2

The actual type of user function argument conflicts with the type declared in function prototype. See the Using Functions manual for details.

EDA36356 MULTI4Y CHARTS NEED AT LEAST FOUR YAXIS COLUMNS

EDA36357 MULTI5Y CHARTS NEED AT LEAST FIVE YAXIS COLUMNS

EDA36358 GANTT CHARTS DO NOT SUPPORT DRILLDOWN OR STYLING

EDA36359 MORE THAN 1 SUBTOTAL/USB-TOTAL/RECOMPUTE/SUMMARIZE

There is more than one SUBTOTAL/SUB-TOTAL/RECOMPUTE/SUMMARIZE on the same key field, which is not allowed. The last one specified will override the rest.

EDA36360 LIMIT FOR NUMBER OF LOADED CHARTS EXCEEDED

Maximum number of loaded charts is 16 10010.

EDA36361 REQUESTED HIERARCHY NOT FOUND FOR MASTER:

EDA36362 NOT ENOUGH MEMORY TO LOAD REQUESTED HIERARCHY

Hierarchies are loaded into memory for use by FML requests. This message means that there is not enough available free memory to load this hierarchy.

EDA36363 NO DATA FOUND FOR REQUESTED HIERARCHY:

The hierarchy does not have any data associated with it.

EDA36364 REQUESTED HIERARCHY IS NOT LOADED

The hierarchy requested was not loaded. Reasons for this include no data for the hierarchy, or an error in Master File syntax.

EDA36365 SYNTAX ERROR IN FML HIERARCHY COMMAND

Only GET CHILD[REN], ADD, and WITH are allowed. All of these must immediately follow a field value; these cannot be used with an OR-phrase, TO-phrase, or masking tags.

EDA36366 WRONG NUMERIC VALUE IN GET/ADD/WITH CHILD n PHRASE

Numeric value should be a positive integer less than 99 in case n greater than 99 it is set to be equal 99.

EDA36367 INDENT REQUIRES A POSITIVE INTEGER VALUE

When using INDENT, the value specified must be a positive integer value.

EDA36368 - EDA36375 RESERVED FOR LOAD CHART

EDA36376 ERROR MESSAGE TEXT MISSING

EDA36377 ERROR MESSAGE TEXT MISSING

EDA36378 XFC INTERNAL ERROR: %1

EDA36379 BINS = %1 is inadequate for this request

The minimum BINS memory required to process the request exceeds the actual size of BINS, which is given in the message in units of pages. Increase the size of BINS by issuing SET BINS; if BINS is already 64 (the maximum), then the request cannot be processed.

EDA36380 SPECIFIED HOLD FORMAT IS ONLY VALID WITH GRAPH

Graphical HOLD formats such as GIF, JPEG, BMP, and WMF can only be used in GRAPH requests.

EDA36381 SEGMENT SIZE FOR '%1' EXCEEDS LIMIT OF %2

Segment size (rounded up to the fullword boundary sum of field lengths, plus 4 bytes per focus pointer) cannot exceed the specified limit. Change the format of the fields and/or number of fields to solve this problem.

EDA36382 FIELDTYPE=R ATTRIBUTE ONLY ALLOWED IN RDBMS MASTER FILES

EDA36383 ERROR OPENING INTERNAL FILE '%1'

EDA36385 LONG SEGMENT/INDEX NAMES CAN NOT BE USED WITH SUFFIX=FOC

Long segment names (and long indexed field names) are not allowed in FOCUS MFD. Make sure that all segment names in the master are at most 8 characters long, and the name of every indexed field fits in 12 characters.

EDA36386 THE 'IN-RANGES-OF' VALUE IS NOT NUMERIC:

The test literal for the IN-GROUPS-OF test is not a valid number.

EDA36387 YOU CANNOT USE 'IN-RANGES-OF' ON A NON-NUMERIC FIELD:

The data field does not have a numeric format; therefore it cannot be grouped into ranges.

EDA36388 POSITION CHARTS DO NOT SUPPORT DRILLDOWN OR STYLING

EDA36389 XFOCUS feature is disabled in environment %1

The operation you requested requires XFOCUS feature to be enabled in your environment. Consult the release documentation for details.

EDA36390 Reserved for XFOCUS

EDA36391 Reserved for XFOCUS

EDA36392 USE... ON MUST PRECEDE MATCHING USE... LOCAL

EDA36393 USE: 'ON' CANNOT BE COMBINED WITH 'NEW'

EDA36394 USE: 'READ' CANNOT BE COMBINED WITH 'NEW'

EDA36395 TITLE IS TOO LONG - LIMIT IS 64 CHARACTERS

EDA36396 CAN'T MODIFY XREF FOCUS SEGMENT %1 (%2)

An attempt has been made to modify a segment that cannot be changed, because it resides in a cross-referenced file. MODIFY has been terminated.

EDA36397 CAN'T MODIFY SEGMENT %1 IN USE-READ FILE %2 (%3)

An attempt has been made to modify a segment in a file that was declared as 'READ' in the USE statement. Modify has been terminated.

EDA36398 CAN'T MODIFY SEGMENT %1 IN READ-ONLY FILE %2 (%3)

An attempt has been made to modify a segment in a file that is not writable (according to OS-level writer permissions). MODIFY has been terminated.

EDA36399 AS_SPAN CONFLICT

A column belongs to more than one AS_SPAN phrase.

EDA36400 AS_SPAN SYNTAX ERROR

Either the AS_SPAN option was applied to a field other than BY, or the verb object or number of columns requested not numeric or less than 2.

EDA36501 UNKNOWN ERROR %1%2

EDA36502 RMS Create Synonym: error parsing parameters %1%2

EDA36503 RMS Create Synonym: error generating CDD definition %1%2

EDA36504 RMS Create Synonym: error parsing CDD definition %1%2

EDA36506 RMS Create Synonym: error writing MFD file %1%2

EDA36507 RMS Create Synonym: error writing MFD file: error code %1%2

EDA36508 RMS Create Synonym: VMS/RMS error %1%2

EDA36509 RMS Create Synonym: internal system error %1%2

EDA36510 RMS Create Synonym: error creating CDD script file %1%2

EDA36511 RMS Create Synonym: error writing to the CDD script file %1%2

EDA36512 RMS Create Synonym: error executing CDD script file %1%2

EDA36513 RMS Create Synonym: error opening CDD definition file %1%2

EDA36514 RMS Create Synonym: invalid parameters passed %1%2

EDA36515 RMS Create Synonym: error creating Create Synonym object %1%2

EDA36516 RMS Create Synonym: error optimizing MFD tree %1%2

EDA36517 RMS Create Synonym: MFD tree is not defined %1%2

EDA36518 RMS Create Synonym: error removing empty segment %1%2

EDA36519 RMS Create Synonym: error finding MFD root segment %1%2

EDA36520 RMS Create Synonym: error building AFD file %1%2

EDA36521 RMS Create Synonym: error adding AFD record node %1%2

EDA36522 RMS Create Synonym: error setting AFD record key value %1 %2

EDA36523 RMS Create Synonym: RMS key offset does not match CDD record %1

EDA36524 RMS Create Synonym: error adding RMS key group to MFD %1%2

EDA36525 RMS Create Synonym: error moving the filed under the key GROUP %1%2

EDA36526 RMS Create Synonym: RMS key size does not match CDD record %1%2

EDA36527 RMS Create Synonym: synonym already exists %1%2

EDA36528 RMS Create Synonym: error checking synonym for existence %1%2

EDA36529 RMS Create Synonym: error parsing COBOL FD %1%2

EDA36530 RMS Create Synonym: error loading NTCF %1%2

EDA36531 RMS Create Synonym: error loading NTCF parameters %1%2

EDA36532 RMS Create Synonym: error loading NTCF MFD tree %1%2

EDA36533 %1%2%3%4

EDA36534 %1%2%3%4

EDA36535 %1%2%3%4

 iWay Software