Messages 3201

Messages 3201 - 4000

Jump to:

EDA3250 OLAP AND ON-DEMAND PAGING ARE MUTUALLY EXCLUSIVE.

EDA3401 ERROR IN OBTAINING SECURITY TOKEN %1%2%3%4

EDA03601 ERROR AT OR NEAR LINE %1 IN PROCEDURE %2

EDA03650 Syntax Error at or near line %1 in %2.

EDA03700 FATAL ERROR!... %1 Parameter %2: Incompatible Types.

EDA03750 COMBOBOX Error on %1: Associated variable is not a Stack.

EDA03800 Duplicate Declaration of %1 Variable %2

EDA3850 Prior traced statement: %1

EDA3201 DUPLICATE KEYWORD IN STYLESHEET FILE AT LINE:

EDA3202 BAD VALUE IN STYLESHEET FILE AT LINE:

EDA3203 UNRECOGNIZED FONT IN STYLESHEET FILE AT LINE:

EDA3204 STYLESHEET FILE NOT FOUND OR UNREADABLE:

EDA3205 INSUFFICIENT MEMORY FOR STYLESHEET PROCESSING

EDA3206 IN NOT YET SUPPORTED WITH PANELED STYLED REPORTS

EDA3207 MISSING KEYWORD AND/OR VALUE IN STYLESHEET FILE AT LINE:

EDA3208 UNTERMINATED STATEMENT IN STYLESHEET FILE AT LINE:

EDA3209 UNKNOWN KEYWORD IN STYLESHEET FILE AT LINE:

EDA3210 COLUMN TRUNCATED BECAUSE WIDTH EXCEEDS MARGINS; COLUMN:

EDA3211 MAXIMUM NUMBER OF PANELS EXCEEDED:

EDA3212 PAGE TOO NARROW FOR SPECIFIED BYPANEL: USING BYPANEL=0

EDA3213 ILLEGAL SET VALUE:

EDA3214 ACROSS SPECIFIED WITH NO VERB-OBJECTS

EDA3215 FOLD-LINE INCOMPATIBLE WITH SPECIFIED OUTPUT FORMAT

FOLD-LINE not allowed with HTML or EXL2K formats.

EDA3216 UNEXPECTED END-OF-FILE READING STYLESHEET

EDA3217 NO DATA FOUND FOR ACROSS FIELD(S

EDA3218 NOTE: REPORT WILL BE PANELED; TOTAL WIDTH IS:

EDA3219 A SINGLE COLUMN MUST BE SPECIFIED; STYLESHEET LINE:

Aggregate column descriptors (B*, field name(*), ACROSSCOLUMN, etc.) are invalid for certain StyleSheet keywords, such as POSITION or SEQUENCE, which must reference a single column.

EDA3220 STYLESHEETS CAN NOT SEQUENCE 'ACROSS' OR 'OVER' COLUMNS

EDA3221 POSTSCRIPT HEADER FILE IS MISSING:

A file called PSHDR.PS, that is distributed with FOCUS, is missing from your FOCUS directory.

EDA3222 THE FONT LOCATION FILE IS MISSING:

A file named FOCFONT.TXT that specifies the location of AFM files is missing.

EDA3223 ONE OF THE AFM FILES IN THE FONT LOCATION FILE IS MISSING

In your stylesheet file, you are referencing a font that is listed in the font location file, but the corresponding AFM file is not available. Check for the existence of all the AFM files listed in the font location file.

EDA3224 AFM FILE CAN NOT BE FOUND OR READ, COURIER WILL BE SUBSTITUTED:

The AFM file, for a font specified in the stylesheet file, could not be found or read.

EDA3225 UNRECOGNIZED STYLESHEET FILE NAME

EDA3226 INVALID TFM HEADER -- UNKNOWN BYTE ORDER:

EDA3227 PAGESIZE NOT SUPPORTED BY CURRENT PRINTER:

EDA3228 STYLED REPORTS CURRENTLY LIMITED TO 128 COLUMNS

EDA3229 GRAPHSERVURL HAS INVALID FORMAT

EDA3230 HTTP REQUEST FOR GRAPHSERVURL RETURNED ERROR:

EDA3231 CANNOT OPEN AN HTTP CONNECTION

EDA3232 ENTER STARTING LABEL'S ROW AND COLUMN, SEPARATED BY A BLANK:

When you specify SET LABELPROMPT=ON, or LABELPROMPT=ON in the StyleSheet, this message is generated to prompt you for the row and column of the first label on the page.

EDA3233 ROW OR COLUMN EXCEEDS PAGEMATRIX DIMENSIONS

A row or column number was entered that exceeds the maximum number of rows or columns specified by the StyleSheet PAGEMATRIX keyword.

EDA3234 VALUES MUST BE INTEGERS AND SEPARATED BY A BLANK

The row and column numbers entered in response to the LABELPROMPT must be integers, separated by a blank.

EDA3235 CANNOT FIND THE FONT FILE

EDA3236

EDA3237 STYLESHEET KEYWORD INVALID IN THIS CONTEXT AT LINE:

Some StyleSheet keywords, such as ORIENTATION, are only valid with TYPE=REPORT. Other keywords may also have specific contexts in which they are valid; consult the documentation for details.

EDA3238 THERE ARE NO DIMENSIONS DEFINED IN THE MASTER FILE

OLAP requires dimensions to be defined with the WITHIN keyword.

EDA3239 THE DIMENSION IS NOT DEFINED

There is a reference to this dimension, but it is not found in the MASTER.

EDA3240 THE DIMENSION IS MULTIPLY REFERENCED

The same parent is specified for more than one dimension.

EDA3241 CIRCULAR DIMENSION REFERENCE

The scenario is as follows: A refers to B, B refers to C, C refers to A.

EDA3242 SAME NAME FOR MORE THAN ONE DIMENSION

The same name appears in a WITHIN='*name' clause more than once.

EDA3243 REFERENCED FIELD IS NOT MARKED AS DIMENSION

FIELDA has a WITHIN=FIELDB clause, but FIELDB does not have WITHIN clause.

EDA3244 SYNTAX ERROR IN DIMENSION SPECIFICATION

The master file parser returned an error parsing the dimensions.

EDA3245 ERROR ON PARSING TABLE IN OLAP

EDA3246 - EDA3249 **** RESERVED FOR OLAP MASPAR ERRORS ****

EDA3250 OLAP AND ON-DEMAND PAGING ARE MUTUALLY EXCLUSIVE.

EDA3251 GIF FILE UNREADABLE OR INVALID:

EDA3252 VERBS MUST PRECEDE 'HOLD FORMAT EXL2K PIVOT'

EDA3253 EXL2K PIVOT TABLE: OVER CLAUSE NOT PERMITTED

EDA3254 EXL2K PIVOT TABLE: NOPRINT CLAUSE INVALID - USE CACHEFIELDS

This error may be caused by an implicit NOPRINT resulting from a COMPUTE or reformatted field.

EDA3255 EXL2K PIVOT TABLE: NO SUBTOTAL ALLOWED ON LAST BY FIELD

EDA3256 EXL2K PIVOT TABLE: MULTIVERB REQUEST IS ILLEGAL

EDA3257 EXL2K PIVOT TABLE: INVALID VERB - MUST USE PRINT VERB

EDA3258 EXL2K FORMULA: CANNOT TRANSLATE MISSING/NOT-MISSING TESTS

Excel cannot distinguish between a blank field and a missing field. Thus, presence tests cannot be translated into Excel formulae. The field will be generated as a static number only, without a formula.

EDA3259 EXL2K FORMULA: UNRECOGNIZED OPERAND OR OPERATOR

There was an error in parsing an arithmetic expression. The field will be generated as a static number only, without a formula.

EDA3260 EXL2K FORMULA: FIELD %1 NOT FOUND IN REPORT

If the user wants to translate a DEFINEd or COMPUTEd field into an Excel/2000 formula, _ALL_ fields referenced in the COMPUTed or DEFINEd field MUST be present (and not NOPRINTed) in the report. The field will be generated as a static number only, without a formula.

EDA3261 EXL2K FORMULA: ARITHMETIC EXPRESSION NOT FOUND FOR FIELD %1

The referenced field is no longer a valid DEFINE or COMPUTE. The field will be generated as a static number only, without a formula.

EDA3262 EXL2K FORMULA: CANNOT TRANSLATE EXPRESSION FOR FIELD %1

An internal error has occurred in translating the Excel formula. No formula will be generated for this field.

EDA3263 EXL2K FORMULA: CANNOT CONSTRUCT EXPRESSION FOR FIELD %1

An internal error has occurred in generating the Excel formula. No formula will be generated for this field.

EDA3264 EXL2K PIVOT TABLE: NO PREFIX ALLOWED

EDA3265 EXL2K PIVOT TABLE: INVALID DUPLICATE USAGE OF FIELD:

A field name may appear only once in an EXCEL PIVOT table. In addition, field names in Pivot tables are case insensitive.

EDA3266 EXL2K PIVOT TABLE: NO COMPUTES ALLOWED

EDA3267 TOC: REPORT TITLE TOO LONG

Report titles may only contain 80 characters or fewer.

EDA3268 TOC: BAD NUMBER OF BY-FIELDS SELECTED

The number of by-fields must be an unsigned integer; no minus signs and no decimal points.

EDA3269 PDF: CANNOT USE NOBREAK WITH PANELED REPORTS

If you expect a report to panel, you cannot use the NOBREAK option either on it or on the previous report in the set of concatenated reports going to this PDF file. The PDF file produced, when this message appears, will be unusable.

EDA3270

EDA3271 A MAXIMUM OF 4 ALTERNATING BACKCOLORS IS ALLOWED

EDA3272 ALTERNATING BACKCOLORS ARE PERMITTED ON DATA LINES ONLY

EDA3273 EXL2K: FORMULAS WILL NOT BE GENERATED FOR REPORTS WITH OVER OR

EXL2K formulae can refer to things in the same row as the formula or in the same column. With OVERs, and certainly with EMR FORs, data may be in a different row or column. Thus, we will not generate formulas.

EDA3274 EXL2K: ROWTOTALS CANNOT GENERATE FORMULAS FOR MULTI-VERB REQUESTS

With multi-verb requests, each row of the report may contain fields from different records in the database. This would yield incorrect results, were we to generate EXL2K formulae.

EDA3275 EXL2K: FORMULAS FOR SUBTOTALS REQUIRE ALL BY FIELDS TO BE PRINTED

Subtotals are predicated on changes in BY fields. If theh BY fields on which things are not subtotaled do not exist in the report, EXL2K formulae cannot know when to generate a subtotal.

EDA3276 EXL2K PIVOT TABLE: NON-USABLE FOCUS CLAUSE(S)

Subheadings, subfootings, recaps, underline, skipline, page break, and repage cannot be used with pivot table reports.

EDA3277 EXL2K PIVOT TABLE: INVALID SET COMMAND - EMPTYREPORT

EDA3278 TOC: FEWER BY FIELDS THAN SPECIFIED IN HOLD...BYTOC N

When the user specifies a number of TOC levels in BYTOC, the number of BY-fields (total; in multi-verb reports, the number of BY-fields in the leftmost verb-set) should be equal to, or greater than, the number of TOC levels.

EDA3279 TABLASTPAGE IS COMPATIBLE WITH TABLEF

EDA3280 TABLASTPAGE CAN ONLY BE USED WITH STYLED OUTPUT FORMATS

EDA3281 COMPOUND REPORT: MISSING CLOSE OR ERROR IN FINAL REPORT

EDA3282 COMPOUND REPORT: PAGE MATRIX INCOMPATIBLE WITH NOBREAK

A pivot table may not combined with another report on the same worksheet.

EDA3283 COMPOUND REPORT: DRILLTHROUGHS CANNOT BE GENERATED.

One cannot use a TOP drillthrough link in isolation, it must be preceded by at least one DOWN link.

EDA3284 COMPOUND REPORT: PIVOT TABLE NOT ALLOWED WITH NOBREAK.

A pivot table may not be combined with another report on the same worksheet.

EDA3285 BYTOC REPORT: 'BYTOC #' not supported for EXL2K

For EXL2K, the optional number after the BYTOC clause is supported. It is always 1.

EDA3286 An EXL2K BYTOC report may not be a pivot table report.

EDA3287 BYTOC: No BY-field specified in the report.

EDA3288 EXL2K PIVOT TABLE: COLUMN-TOTAL illegal if no BY-fields

EDA3289 EXL2K TEMPLATE FILE: Error opening file

EDA3290 EXL2K: Template file is not a valid WebArchive file

A template file is an Excel file save in WebArchive format. This requires using Excel 2000 or higher.

EDA3291 EXL2K: Template specification error

The sheet number must always be associated with a TEMPLATE and must be an unsigned integer - no minus signs, no decimal points.

EDA3292 EXL2K: TEMPLATE FILE: Sheet # does not exist in template

The sheet number must always be associated with a TEMPLATE and must be an unsigned integer - no minus signs, no decimal points.

EDA3401 ERROR IN OBTAINING SECURITY TOKEN %1%2%3%4

Cannot get security token passed.

EDA3402 WRONG QUERRY - CHECK MASTER %1%2%3%4

EDA3403 FETCH ERROR %1%2%3%4

EDA3404 INSUFFICIENT STORAGE %1%2%3%4

EDA3405 INVALID ALIAS VALUE IN MFD %1%2%3%4

EDA3406 WARNING. INVALID OCCURS= VALUE - %1%2%3%4

EDA3407 FOCUS LENGTH AND QDS'S IS NOT THE SAME FOR A FIELD - %1%2%3%4

EDA3408 NUMBER OF REQUESTED AND RETURNED FIELDS IS NOT EQUAL %1%2%3%4

EDA3409 UNACCEPTABLE DATE FORMAT IN FIELD DISCRIPTION %1%2%3%4

EDA3410 MODULE QOEC990 OR QRYLIB IS MISSING %1%2%3%4

Check to see if qrylib is allocated and contains the qoec990 module.

EDA3411 ZERO SECURITY TOKEN FROM QOEC990 MODULE %1%2%3%4

Module qoec990 returns zero as a security token.

EDA3412 MODULE QOEC200 OR QRYLIB IS MISSING %1%2%3%4

Check to see if qrylib is allocated and contains the qoec200 module.

EDA3413 ERROR IN ACCESS FILE %1%2%3%4

Check the QDS table name in the Access File.

EDA3414 INVALID DATE FIELD IN FILE %1%2%3%4

Check the QDS date.

EDA3415 RETURNS NULL DATE IN FIELD %1%2%3%4

EDA03601 ERROR AT OR NEAR LINE %1 IN PROCEDURE %2

An error occurred near the specified line number. The subsequent error message(s) should indicate the problem.

EDA03602 Warning. Ignoring redefinition of %1 field %2.

In MAINTAIN, once a field has been established with a format, the format cannot be changed. Most likely, this MAINTAIN has a field name that has been given two different formats. Either change one of the field names or omit the format.

EDA03603 Types %1 and %2 differ; built in conversion supplied.

This message will never be displayed.

EDA03604 %1 is not a valid format.

The format specified after a field name is not valid. FOCUS supports A1 through 256, I1 though 9, D1 through 15, P1 through 15, F1 though 9 and date formats. Formats may also contain any of the allowed edit options.

EDA03605 %1 is not recognized.

MAINTAIN has encountered an object such as a field name, stack name, or case name that does not exist. Check for spelling errors or any other errors that might have occurred.

EDA03606 Incompatible types %1 and %2.

EDA03607 %1 is an invalid type for operator %2, expecting %3 type.

EDA03608 Invalid constant '%1'.

The value specified could not be interpreted by MAINTAIN as a constant of any FOCUS type. Check the specification of the constant for any typographical errors.

EDA03609 Wrong argument count in call to case %1. Got %2, expected %3.

The definition of a MAINTAIN Case specifies the number and types of parameters it expects. The invocation of the case that was flagged as an error did not comply with the definition of the case as regards the number and/or types of the parameters passed.

EDA03610 %1 is not a field in (or member of) type %2.

The most common example of this error is referencing a field in a stack when the stack does not contain that field as a column.

EDA03611 %1 is not a method in type %2.

EDA03612 Type %1 is not a stack or collection type.

EDA03613 EVENT not allowed outside of method context or in STARTUP.

EDA03614 %1 is not an event in type %2.

EDA03615 Type %1 is not defined.

EDA03616 Warning. Too many values, ignoring value #%1.

There are too many values in a nested initialization for the data type. Extra values are ignored.

EDA03617 Too many subscripts on type %1.

EDA03618 Unable to analyze type reference.

EDA03619 MASTER file has changed since procedure :%1: was compiled.

One of the MASTER files mentioned in the FILE statement has changed since the MAINTAIN was compiled. The Maintain procedure mentioned in the error message needs to be COMPILEd again.

EDA03620 Pointer variables must be initialized.

EDA03621 Bad pointer type reference %1.

EDA03622 Bad collection type reference '%1 OF %2'.

EDA03623 'RETURNS ...' not allowed on case %1 in type %2, ignoring.

EDA03624 Duplicate definition of case %1 in type %2, ignoring.

EDA03625 Duplicate definition of event %1 in type %2, ignoring.

EDA03626 Duplicate definition of type %1, ignoring.

EDA03627 Duplicate definition of case %1, ignoring.

EDA03628 Type name %1 is not allowed because it is a FOCUS format.

EDA03629 Both initilization and STARTUP for global %1.

EDA03630 Compiler Error: %1

EDA03631 (Internal Error) No Info Node.

This message should never be displayed.

EDA03632 Internal Error

EDA03633 Stack : %1 : contains multiple paths.

In MAINTAIN a single stack is restricted to containing data from only one path. Examine the database statements that reference the stack in question to determine where the stack received data from different paths.

EDA03634 Database Statement does not reference the Database.

None of the fields mentioned in the database statements referred to fields in the database. Check the spelling of the field in the statement. Alternatively, if the field name is ambiguous, qualify it with the segment and/or master file name.

EDA03635 %1 : Is not a Database Entity.

The field in question appears in a statement that requires a database field. The field specified could not be interpreted as a database field.

EDA03636 %1 : Is Unsupported Syntax.

EDA03637 A Database Statement may only reference one Path.

In MAINTAIN only one path may be referenced by any single database statement. If data is required from multiple paths, process each path with separate statements. Remember that a single stack has the same single path only restriction.

EDA03638 %1 area overflow.

EDA03639 Invalid Combination of Copy Arguments.

If a Copy is specified Current as the From or Into, then the statement may not have a For or Where clause.

EDA03640 On Match/Next Include is invalid syntax.

In MAINTAIN, care is given to avoiding multiple instances of the same key in the database. As a result, syntax like ON MATCH INCLUDE is problematic and flagged as an error.

EDA03641 On NoMatch/NoNext Update/Delete is invalid syntax.

Database statements such as UPDATE and INCLUDE operate on a record in the database. Statements like ON NOMATCH UPDATE have no meaning.

EDA03642 Root of retrieval may not be a Unique segment.

EDA03643 There are no databases in scope for the statement.

EDA03644 Field : %1 : is not updateable.

Certain fields in a database are marked as non-updateable. Key fields in FOCUS databases are such fields.

EDA03645 WHERE clause syntax: %1

EDA03646 FOR (update/delete/include/revise) requires a FROM stack.

The FOR ... UPDATE statement is designed to operate on a set of records. Such a set must be specified (via the FROM clause) for the statement to make sense.

EDA03647 %1 type information incomplete for %2.

EDA03648 FOR retrieval requires an INTO stack.

EDA03649 Undefined Stack : %1 : in %2 clause.

EDA03650 Syntax Error at or near line %1 in %2.

EDA03651 The command %1 is not yet implemented.

EDA03652 (Internal Error) in Maintain Parser.

This message should never be displayed.

EDA03653 Cannot Display Non-Scalar Object.

EDA03654 Undefined CASE name: %1.

EDA03655 Invalid WINFORM command: %1.

EDA03656 WebFOCUS MAINTAIN Error. Goto Exit Forced. Reason = %1

EDA03657 Subscript must be an integer for type %1.

EDA03658 Invalid type/format for argument #%1 in call to CASE %2.

EDA03659 STACK CLEAR error: %1.

EDA03660 WINFORM Error on %1: SHOW command must precede HIDE.

EDA03661 WINFORM Error on %1: SHOW command must precede UNHIDE.

EDA03662 (Internal Error) Unable to read UWS object at address %1

This message should never be displayed.

EDA03663 (Internal Error) Unable to read '%1' for function '%2'

This message should never be displayed.

EDA03664 Error processing arguments to external function '%1'

EDA03665 Error loading external function '%1'

EDA03666 : %1 : Is an Invalid Type Column Position.

Subsequent data to be typed is ignored.

EDA03667 Type Statement Area Overflow near column : %1 :

There is a limit of 256 bytes on the size of a single line of formatted output in a TYPE statement. Try inserting "</n" to break the large line into smaller pieces.

EDA03668 Winform Error: Source data, %1, is not in %2 format.

EDA03669 Winform Error: Received data, %1, is not in %2 format.

EDA03670 Target of CONTAINS/OMITS, %1, is longer than source, %2.

EDA03671 DEPENDENTS ignored on CASE %1.

EDA03672 Invalid Fieldname following FOC.

EDA03673 : %1 : Exceeds maximum length for a virtual fieldname.

EDA03674 ?flat may only operate on real fields.

EDA03675 Error parsing file : %1 :.

EDA03676 : %1 : Is not a valid compile time function.

EDA03677 A COPY Statement with a WHERE clause requires a FOR.

EDA03678 DB Format Error: Data from Database, %1, is not in %2 format.

EDA03679 DB Format Error: Data for Database, %1, is not in %2 format.

EDA03680 %1 is not an acceptable value for field %2.

EDA03681 Syntax Error near column %1.

EDA03682 Error In FIND. : %1 : does not specify a Database Field.

EDA03683 Invalid Value : %1 does not lie between %2 and %3.

EDA03684 %1 is Bad ProcName: Exceeds Maximum Length

The Procedure Name in an EXEC Statement or a METHOD in the Master Exceeds the Maximum supported name length, currently equal to 31.

EDA03685 Unable to Create Execution Manager

The Execution Manager Object's STARTUP Method failed, probably due to a resource outage. The Execution Manager is created to process the EXEC statement, or a Method in the Master File, or to send and receive parameters.

EDA03686 Compilation failed for called Procedure: %1.

EDA03687 Load failed for compiled image of called Proc: %1.

EDA03688 Run failed for called Procedure: %1.

EDA03689 Called Proc, %1, wants %2 input parms but received %3.

EDA03690 Called Proc, %1, wants %2 Output parms but was called w/ %3.

EDA03691 %1 Parm number %2 cannot be mapped from caller to callee.

EDA03692 Run-time Error : %1

EDA03693 WARNING : Divide by zero!

EDA03694 Stack index is less than or equal to zero.

EDA03695 Parameter Type Not Supported For Procedure Calls.

EDA03696 Parameter Type Map Exceeds Maximum Length.

EDA03697 Fully Qualified Name Required For Type Map Too Long.

EDA03698 WARNING!... %1 Parm number %2: Partial Type Match.

The stack composition of the CALLER's stack is not identical to that of CALLEE's.

EDA03699 Fatal Error...INTO stack requires HTML column name

For EXEC statement receiving PCHOLD FORMAT HTML/ HTMTABLE records from the CALLEE, a column name of HTML and format A250 is required.

EDA03700 FATAL ERROR!... %1 Parameter %2: Incompatible Types.

EDA03701 Invalid SET %1 value for MAINTAIN.

Maintain requires the FOCUS field name setting to be NEW or NOTR. A setting of OLD will produce this message. Similarly, Maintain requires the QUALCH to be a period ('.').

EDA03702 Warning. No position on parents of segment : %1 :

An attempt was made to either match or next (explicitly or implicitly) on the segment specified without a position on the parent segments. As a result, no records could be retrieved.

EDA03703 Warning. Cannot find the IMPORT file : %1 :.

EDA03704 Cannot find the file : %1 :.

EDA03705 Sink Name Conflict on Database :%1:.

In a Maintain application, only one sink machine may be specified for any one FOCUS database. Maintain detected the same database being specified with different ON sinknames. The application is terminated.

EDA03706 WINFORM Error on %1: CLOSE not allowed for suspended form.

EDA03707 WINFORM Error on %1: SHOW command must precede CLOSE.

EDA03708 WINFORM Error on %1: Duplicate SHOW command for a form.

EDA03709 WINFORM Error on %1: INACTIVE not allowed for active form.

EDA03710 WINFORM Error on %1: SHOW command must precede REFRESH.

EDA03711 WINFORM Error on %1: HIDE is not allowed for active form.

EDA03712 WINFORM Error on %1: UNHIDE is meaningless for displayed form.

EDA03713 EDIT CONTROL Error on %1: Associated variable is not an FBIT.

EDA03714 GRID Error on %1: Associated variable is not a Stack.

EDA03715 STATIC CONTROL Error on %1: Associated variable is not an FBIT.

EDA03716 LISTBOX Error on %1: Associated variable is not a Stack.

EDA03717 RADIOGROUP Error on %1: Associated variable is not a Stack.

EDA03718 Error on %1: Object is not a Rectangle.

EDA03719 Error on %1: Object is not a Window.

EDA03720 Variable :%1: is not a stack. It cannot be sorted.

EDA03721 :%1: is not a column in stack :%2:. Cannot sort on it.

EDA03722 Command :%1: failed. Out of Memory.

EDA03723 :%1: is not a database field.

The update command operates only on fields.

EDA03724 Invalid Stack Copy Argument.

The Copy command may only be used for moving structured types. Either the From or the Into argument is a scalar.

EDA03725 :%1: is explicitly declared and cannot be inferred.

EDA03726 DBA Error. User does not have %1 access rights for :%2:

EDA03727 Datatypes not supported for computational/comparison operation.

EDA03728 Segment :%1: is not writable.

EDA03729 Error processing return value for external function '%1'

EDA03730 :%1: is/are not supported in Maintain.

EDA03731 Error Allocating Memory for X-Maintain Execution

This error may occur during the Compilation or Execution Phase.

EDA03732 Error Binding to Child Procedure: %1

The Bind Failure is only Fatal during the Execution Phase.

EDA03733 Communications Error in X-Maintain Processing

Using the Appropriate Communications Trace may yield more detail.

EDA03734 Error occurred on MAINTAIN server during remote processing

EDA03735 Error Occurred Building Outbound X-Maintain Data Stream.

EDA03736 Server returned inconsistent Bind Reply Data Stream

EDA03737 Server returned unrecognized Data Stream

EDA03738 Comm Failure Attempting Send to Proc %1 at Srvr %2

EDA03739 Failure Attempting Communications Initialization

EDA03740 Comm Fail attempting Connect to Proc %1 at Srvr %2

EDA03741 Comm Fail Receiving Message from Proc %1 at Srvr %2

EDA03742 Communications Driver returned unrecognized Event.

EDA03743 Error Exchanging Maps With Proc %1 at Srvr %2

EDA03744 Error Packing Data For Shipment to Proc %1 at Srvr %2

EDA03745 Error Receiving Data From Proc %1 at Srvr %2

EDA03746 Invalid Execute Reply message from Proc %1 at Srvr %2

EDA03747 Error Message %1 issued for Proc %2 at Srvr %3

EDA03748 More than 15 Databases Specified.

Currently a Maintain procedure may specify up to and including 15 databases on the command line. In this case more than 15 were specified.

EDA03749 %1 FOCCOMP is 'old'. To regain start up speed use RECOMPILE.

In this release, the format of the MAINTAIN FOCCOMP has changed. You can still use RUN to execute a MAINTAIN FOCCOMP but the time to first screen will be slow (similar to EX of MAINTAIN FOCEXEC). To regain the start up speed, use RECOMPILE on the old FOCCOMP to produce a new FOCCOMP.

EDA03750 COMBOBOX Error on %1: Associated variable is not a Stack.

EDA03751 PICTUREBOX Error on %1: Associated variable is not an FBIT.

EDA03752 PICTUREBUTTON Error on %1: Associated variable is not an FBIT.

EDA03753 Warning: Missing Closing Quote near Column %1.

EDA03754 Duplicate item name %1 in type %2

Items' names must be unique.

EDA03755 Last argument to %1 must be a variable.

The last argument in a user written subroutine call must be a variable.

EDA03756 Cross-reference to file %1 on different SU.

All of a file's cross-references must be on the same sink machine. Check USE list.

EDA03757 Acceptable range of values is between %1 and %2.

EDA03758 Communications Software Not Installed Or Not In Path

EDA/LINK API is not available to Parent Maintain Attempting Cross Machine CALL.

EDA03759 An Invalid Stack was provided to the GetAccept Method

The Stack passed by an application to the GetAccept method on a Field must have an ALPHANUMERIC field of sufficient width as its first column.

EDA03760 SetFocus can't be applied before Winform %1 is shown.

EDA03761 Fatal Error: %1 %2

The above error should never occur. If it does, please write down the exact message description and report the problem to your iWay representative.

EDA03762 Can't use FIND with non-indexed field %1.

The field specified must be an indexed field.

EDA03763 Prior Message Produced by Proc %1 on Srvr %2

EDA03764 From Server ==> %1

EDA03765 Error Loading Compiled Procedure: %1

The COMPILED Image of the specified procedure cannot be loaded.

EDA03766 Client/Server mismatch for file %1

The number of fields for this file does not match. This may be due to different MASTER files on the client and server, or a DBA field restriction.

EDA03767 FIND error. Fields %1 and %2 are incompatible.

The "from" and "to" fields have different lengths.

EDA03768 Error writing to %1 FOCCOMP.

EDA03769 Unable to open %1 FOCCOMP for writing.

EDA03770 Unable to open %1 FOCCOMP for reading.

EDA03771 Error reading from %1 FOCCOMP.

EDA03772 Invalid version for %1 FOCCOMP. Please RECOMPILE.

The FOCCOMP was produced with an older version of MAINTAIN. Use the RECOMPILE command to create an updated FOCCOMP.

EDA03773 COMPILE failed with return code %1

EDA03774 Database position invalidated for file %1

A child (called) MAINTAIN has performed a database operation which invalidated the parent MAINTAIN's position.

EDA03775 Dynamic cross-reference for file %1 not supported.

The closest "real" parent of the dynamic cross-referenced segment is not using the local direct FOCUS access mechanism.

EDA03776 File-Transfer-Utility cannot obtain enough memory

EDA03777 FTP client attempted operation with unknown server

EDA03778 FTP Put has failed

No server acknowledgement has been received.

EDA03779 FTP utility has encountered an invalid data stream

EDA03780 FTP utility: internal error building x-mit packet

EDA03781 FTP utility encountered error attempting to read file

EDA03782 FTP encountered error transmitting file

EDA03783 FTP request for FileList has failed

EDA03784 FTP failure writing file

EDA03785 FTP failed connecting to server

EDA03786 FTP failure: Communications link is not installed

EDA03787 FTP failure: Communications failure.

EDA03788 FTP failure: Server reports an error in processing

EDA03789 FTP fail: internal error building data stream

EDA03790 FTP fail: Send Fail

EDA03791 FTP fail: Communications Initialization Error

EDA03792 FTP fail: Error receiving response from server

EDA03793 Warning: Null Stack Copy Detected.

The specified COPY command (includes Database commands that specify a FROM stack) has not found any columns in the two stacks that match. No Data will be moved. If field names and formats match, check the missable attribute.

EDA03794 Protocol compatibility error with SU ( %1 )

The client requires services that are unavailable on the specified server. The SU (sink machine) should be upgraded to the proper qfqdbe dll revision level.

EDA03795 Invalid PF-key mapping.

EDA03796 Master File :%1: has already been specified.

The list of Master Files on the Maintain command line may not have repetitions.

EDA03797 File %1 is write-protected.

User has attempted to UPDATE, INCLUDE, or DELETE to a write-protected file.

EDA03798 Call Transmission Limit Exceeded.

There is currently a maximum amount of data (this includes the data describing the data) that can be passed in a CALL statement.

EDA03799 Open for file :%1: failed.

The file specified could not be opened. If it was a DDNAME, check to make sure a FILEDEF was issued for it.

EDA03800 Duplicate Declaration of %1 Variable %2

The variable specified has been declared more than one time in the specified scope level.

EDA3801 Maintain EXEC RPC failure

EDA3802 Maintain EXEC Receive failure

EDA3803 Maintain EXEC Connect failure

EDA3804 Maintain EXEC Bind failure

EDA3805 Local Maintain EXEC not supported on this platform.

EDA3806 FTP failure: compile error.

EDA3807 FTP failure: error deleting file.

EDA3808 Warning: Boolean operation on non-boolean expression.

The expression may not produce the expected results.

EDA3809 Warning: 'IS NOT' encountered, try 'IS_NOT'.

The expression may not produce the expected results.

EDA3810 Error overriding %1 %2::%3 : signatures are not identical.

The event or method definition overrides a method or event in the base class that has a different parameter list or return value.

EDA3811 Incomplete class definition '%1'.

An incomplete or undefined class was encountered while processing a method's formal parameter list.

EDA3812 EXPORT modules cannot be executed directly.

Programs that are specified as MODULE EXPORT cannot be executed directly.

EDA3813 Invalid type %1 for argument %2 to user written subroutine %3

User written subroutines can only have arguments that are FOCUS types. (no user defined types or MAINTAIN extended types allowed).

EDA3814 Unclosed multi-line comment

Multi-line comments that start with '$*' must be closed with '*$'.

EDA3815 Stack Sort BY field :%1: does not specify a column.

The most likely cause is that the file name or a segment name in the stack is the same as the field name you are trying to sort by. Augmenting the qualification of the field name will fix the problem.

EDA3816 Disconnect failed.

EDA3817 Warning: %1 is outside of the century window.

EDA3818 ENDREPEAT encountered outside of a REPEAT loop.

EDA3819 Date format error: %1 cannot be greater than %2

EDA3820 Warning: Assuming %1 is an abbreviation for %2

When a field in a structure is not found, MAINTAIN will look for 'nested' fields with the same name as an abbreviation. In certain cases, this may lead to unintended results.

EDA3821 Local variable space overflow

There number or size of the local variables, or the size of an expression, may be too large.

EDA3822 Expression too large

There are too many terms in an expression.

EDA3823 NULL object handle encountered

A handle (@ variable) that has not been assigned to an object is being referenced.

EDA3824 Memory allocation failure for %1

An internal function was unable to allocate sufficient memory for task completion. Try increasing the run-time memory allocation. If the error condition persists, please notify your iWay representative.

EDA3825 Recursive CALL of Maintain :%1: detected. Not Supported.

Maintain does not support recursive calls. This includes direct and indirect recursive calls.

EDA3826 Expression has no value

MAINTAIN requires a value, but the expression coded does not produce a value.

EDA3827 Warning: Assuming %1 is a FUSELIB function

The function being referenced may not be available on all platforms.

EDA3828 From Server %1 ==> %2

EDA3829 An EXEC Statement must specify a Server

An Exec statement requires an AT clause.

EDA3830 Error encountered while parsing master file :%1:

EDA3831 Unrecognized MNTCON Command :%1:

EDA3832 Unable to RUNIMAGE :%1:. Image not previously loaded.

For an application to be invoked using RUNIMAGE, there must have been a LOADIMAGE for it previously in the server profile.

EDA3833 Internal Error detected in MASPAR :%1:

EDA3834 Unable to PREPARE Maintain Application Server

EDA3835 Unable to START Maintain Application Server

EDA3836 LOADIMAGE for :%1: Failed.

Check for other error messages to determine the cause of the failure.

EDA3837 LOADIMAGE for :%1: was Successful.

EDA3838 Cannot prepare specified Maintain for Application Server

The Maintain in question has requirements that conflict with the Application Server architecture. Check subsequent error messages to determine which Maintain is at fault. The most likely cause is FOCUS DB access, DBA in the master, or DEFINES in the master.

EDA3839 AppServer command :%1: invalid in state :%2:

Certain application server commands are invalid in certain application server states. For example a running application server cannot accept a COMPILE command.

EDA3840 Called Procedure :%1: has not been preloaded, Cannot Invoke.

Once the Maintain Application Server has been started all Maintains that are invoked must have been preloaded during the preparation phase of the server.

EDA3841 A Maintain Remote CALL Server must specify PRIVATE deployment.

Reconfigure the server. The most likely cause of confusion is due to the fact that the Maintain Scaleable Application Server requires POOLED deployment. The Maintain Remote CALL Server is a different type of server.

EDA3842 Packed decimal precision loss during call.

EDA3843 Client Parameter at Index: %1 Precision: %2 Row: %3, Column: %4.

EDA3844 Input Parameter Data: %1.

EDA3845 Does Not Match Server Parameter Precision.

EDA3846 Server Focexec: %1

EDA3847 %1 %2 %3 %4 %5 %6

EDA3848 Maintain image of files does not match current file list

A non-Maintain request (TABLE, etc.) has caused file descriptions to move in memory since the Maintain procedure was loaded. Use the USE command in your profile to latch the files into relative positions before running any Maintain procedures.

EDA3849 Compiled maintain image not loadable: %1

EDA3850 Prior traced statement: %1

When an error or warning occurs, the last statement recognized by the Maintain statement trace facility is displayed. The granularity of statement tracing can be increased by issuing the DEBUG option when the procedure is compiled (syntax: MNTCON DEBUG COMPILE procname).

EDA3851 Database rollback forced due to previous error.

EDA3852 Warning: %1 of fex or winform size-limit already reached.

Over 90% of AST nodes are used already. Adding complexity to the fex or winform could exceed AST node limit.

EDA3853 Failure opening an IMPORT

EDA3854 MNTCON command %1 requires a filename argument

EDA3855 FATAL ERROR!... %1 Parameter %2: Stack cannot be subscripted.

EDA3856 FCM file contains no Web Debug information

EDA3857 - EDA4000 Error Message Undefined

iWay Software