Messages 32001 - 32600
EDA32001 INSUFFICIENT CORE AT SERVER NODE
Insufficient memory available in server address space to support additional user. Consult system administrator of server facility.
EDA32002 MODULE INITIALIZATION FAILURE
FOCNET internal error. Contact an iWay representative.
EDA32003 SERVER CANNOT LOAD MODULE REQUIRED FOR SERVICE
FOCNET internal error. Contact an iWay representative.
EDA32004 CURRENT REQUEST FAILED, SESSION DISCONNECTED
Client disconnected by server following unexecutable request. This message usually follows detailed error report generated by specific server module.
EDA32005 CLIENT-INITIATED DISCONNECT DURING SERVER EXECUTION
Client has requested termination of currently active work unit. May be caused by PF3 during FOCSTACK request, or forced termination of client session.
EDA32006 REQUESTED SERVICE NOT AVAILABLE ON KNOWN SERVER NODES
FOCNET configuration error. Contact an iWay representative.
EDA32007 CLIENT DISCONNECTED DUE TO COMMUNICATIONS ERROR
FOCNET communications error. Contact an iWay representative.
EDA32008 CLIENT DISCONNECTED DUE TO INTERNAL PROTOCOL ERROR
FOCNET internal application level error. Contact an iWay representative.
EDA32009 CLIENT DISCONNECTED DUE TO INVALID MESSAGE FORMAT
FOCNET internal application level error. Contact an iWay representative.
EDA32010 ACCESS DENIED BY SERVER SECURITY SUBSYSTEM
System level security on server node denied access to user due to invalid USERID/PASSWORD supplied at sign-on. Consult system administrator of server facility.
EDA32011 FATAL ERROR DURING REMOTE OR EXTERNAL DATA ACCESS
A condition fatal to MODIFY execution was encountered by FOCNET in external database module. Consult server trace ( HLIPRINT ) for detailed diagnostic.
EDA32012 FATAL ERROR DURING REMOTE DATA ACCESS INITIALIZATION
A condition fatal to MODIFY execution was encountered by FOCNET in external database access initialization. Consult server trace ( HLIPRINT ) for detailed diagnostic.
EDA32013 COMMUNICATIONS TERMINATED - REASON UNKNOWN
The line of communications was terminated without advance warning from the remote application. This may occur when the partner process is shut down abruptly, without application closure.
EDA32014 FATAL ERROR DURING REMOTE DATA ACCESS TERMINATION
An abnormal condition was detected by FOCNET during remote data access termination. Consult server trace ( HLIPRINT ) for detailed diagnostic.
EDA32015 SESSION TERMINATED DUE TO TERMINATION OF PARENT MODULE
A module or process on the server upon which the current service depends has been terminated.
EDA32016 SESSION TERMINATED BY GATEWAY OPERATOR
Gateway operator issued the FORCED DISCONNECT command against your session.
EDA32017 SESSION CANNOT BE ESTABLISHED - GATEWAY QUIESCED
A session with the server cannot be initiated because the gateway operator has issued the QUIESCE command. This may be a temporary condition. If persistent, - contact the GATEWAY operator.
EDA32018 INTERMEDIATE NODE UNABLE TO CONNECT OUT
No connection can be made to the server because an intermediate node was unable to establish connection with the server or the next node in the path. Please check the Hermes Configuration file and then establish that the server in question is functioning.
EDA32019 UNRECOGNIZED CODE PAGE
A node in the network has requested translation services to and from a code page not described during installation. Please refer to the installation guide for National Language Support or contact an iWay representative.
EDA32020 ENCRYPTION VERSION INCOMPATIBILITY
The authorization of the password failed due to differences in the versions of the security and encryption packages between the client and server.
EDA32021 CONSOLE COMMAND %1 IS INVALID
EDA32022 USERID %1 IS NOT AUTHORIZED TO PERFORM THIS ACTION
EDA32023 CURSOR %1 HASN'T BEEN FOUND
EDA32024 TRACE VALUE %1 IS ILLEGAL
EDA32025 THERE ARE NO SESSIONS WITH USERID %1
EDA32026 INTERNAL SERVER ERROR ON CONSOLE REQUEST
EDA32027 CONSOLE CONNECT TO %1 FAILED
EDA32028 CONSOLE SEND FAILED
EDA32029 CONSOLE RECEIVE FAILED
EDA32030 PRIVATE SERVER USER LOGON FAILURE
System level security on server node denied access to user due to invalid USERID/PASSWORD supplied at sign-on. Consult system administrator of server facility.
EDA32031 ENCRYPTION VERSION INCOMPATIBILITY, LOGON FAILED
The authorization of the password failed due to differences in the versions of the security and encryption packages between the client and server.
EDA32032 PREVERIFIED LOGON FAILURE
Server denied the connect request from client. Provide explicit USERID and PASSWORD in order to connect to this server.
EDA32033 UNRECOGNIZED USERID
System level security on server node denied access to user due to invalid USERID supplied at sign-on. Consult system administrator of server facility.
EDA32034 INVALID PASSWORD
System level security on server node denied access to user due to invalid PASSWORD for given USERID supplied at sign-on. Consult system administrator of server facility.
EDA32035 LOGON FAILED - PASSWORD HAS EXPIRED
System level security on server node denied access to user. The PASSWORD supplied at sign-on is no longer valid. Consult system administrator of server facility.
EDA32036 LOGON FAILED - INVALID NEW PASSWORD
The new password supplied is not valid.
EDA32037 LOGON FAILED - EXTERNAL SECURITY PACKAGE REJECTION.
The installation defined security exit rejects this logon. Consult system administrator of server facility.
EDA32038 ROW WIDTH RETURNED EXCEEDS ALLOWED MAXIMUM
The width of the next line of the report to be generated would exceed the maximum allowed. Report generation is aborted.
EDA32039 SERVER ABNORMAL TERMINATION DURING DATA ACCESS
The FOCNET server abnormally terminated during data access. Consult the server trace for diagnostic information.
EDA32040 FOCNET INITIALIZATION FAILED FOR CLIENT
FOCUS was unable to initialize communications. Check FOCNET configuration file or contact system administrator.
EDA32041 REMOTE CLIENT INITIALIZATION FAILED
FOCNET internal error. Contact system administrator.
EDA32042 FOCNET SESSION ESTABLISHMENT FAILED FOR CLIENT
FOCUS was unable to initialize communications with partner. Check FOCNET configuration file or contact system administrator.
EDA32043 FOCNET ERROR WHILE SHIPPING FOCSTACK
An error occurred while FOCUS was sending the request to the remote destination. Please issue REMOTE TRACE = ON for more information or contact system administrator.
EDA32044 SERVER DOESN'T RESPOND
A communications error prevented FOCUS from receiving the report from the remote server. Please issue REMOTE TRACE = ON or contact system administrator.
EDA32045 UNRECOGNIZED OUTPUT FROM HOST
FOCNET internal error. Contact iWay.
EDA32046 FOCEXEC PDS NOT ALLOCATED
In order to employ the HOLD FORMAT FOCUS option in REMOTE execution mode of FOCNET on MVS, the ddname FOCEXEC must be allocated before the request is issued.
EDA32047 ALLOCATION FAILED FOR THE HOLDMAST FILE
There was no HOLDMAST pds allocated at the time of the request. FOCUS attempted to perform the necessary allocation, and failed. This only applies under MVS/TSO.
EDA32048 ALLOCATION FAILED FOR THE HOLD FILE
The file for the HOLD was not pre-allocated. FOCUS attempted to perform this allocation dynamically, and failed. This only applies under MVS/TSO.
EDA32049 ILLEGAL TRACE VALUE
Proper values for REMOTE TRACE = are:
OFF - No trace.
WARNING - Information associated with possible problems.
ALL - Gives full Hermes debugging information for known problems.
EDA32050 FATAL REMOTE ERROR
An error occurred during remote execution that prevented any further processing of the FocStack. See prior error report for more information.
EDA32051 FOCNET INITIALIZATION FAILURE - INSUFFICIENT CORE
The FOCNET communications driver could not be initialized due to a failure in the memory management system. Contact your FOCNET administrator.
EDA32052 FOCNET INIT FAILED - CORE, CONFIG OR COMM. DRIVER
The FOCNET session management system could not be initialized due to a failure in the memory management subsystem, an error in configuration management, or a failure in the communications driver. Contact your FOCNET administrator.
EDA32053 FOCNET INIT FAILED - NO CONFIGURATION FILE FOUND
The FOCNET session management system could not find its configuration file. The logical name CONFIG should be defined to the process employing FOCNET. Check your CLIENT start-up procedure.
EDA32054 FOCNET INIT FAILED - INVALID CONFIG FILE
An error was detected in the FOCNET configuration file during initialization. Set the API trace to ON for further information, or contact your FOCNET administrator.
EDA32055 INVALID DESTINATION FOR REQUESTED SERVICE
The FOCNET configuration does not contain an entry locating the requested service at the specified SERVER name. Check your configuration file or contact your FOCNET administrator.
EDA32056 LOCAL COMMUNICATIONS RESOURCE COULD NOT BE INITIALIZED
The FOCNET session management system could not initialize the local communications resource. Check the configuration file, turn on the subsystem trace for more details, or contact your FOCNET administrator.
EDA32057 COMM SESS COULD NOT BE ESTABLISHED WITH REMOTE RESOURCE
The FOCNET session management system could not establish a communications session between the local and remote resources. Check the configuration file, turn on the subsystem trace for more details, or contact your FOCNET administrator.
EDA32058 UNRECOGNIZED REMOTE COMMAND OR SET %1
The input following the REMOTE keyword was unrecognized. Valid Options are:
REMOTE PASSWORD password,
REMOTE USERID userid
REMOTE DESTINATION servername
REMOTE EXEC focexecname
EDA32059 UNRECOGNIZED -REMOTE COMMAND
The option specified in a -REMOTE line of the focexec was not recognized or not allowed. Options currently supported are: REMOTE BEGIN and REMOTE END.
EDA32060 FOCNET COMMAND ILLEGAL IN CURRENT MODE
FOCNET commands are not allowed when SET REMOTE = NEW is in effect. Issue SET REMOTE = OLD before entering FOCNET commands again.
EDA32061 UNRECOGNIZED INPUT FROM CLIENT
FOCNET internal error. Contact an iWay Representative.
EDA32062 USERID NOT IN GROUP SPECIFIED
System level security on server node denied access to user because USERID is not associated with the GROUP specified. Consult system administrator of server facility.
EDA32063 USERID CURRENTLY REVOKED
System level security on server node denied access to user due to revoked status of supplied USERID. Consult system administrator of server facility.
EDA32064 SECURITY PACKAGE NOT ACTIVE AT SERVER
The Server is not being run with the proper authorization. Verification of Userid and Password for this connection can not be performed, and access is denied. Consult system administrator of server facility.
EDA32065 USERID ACCESS TO GROUP REVOKED
System level security on server node denied access to user. Access of supplied USERID in supplied GROUP has been revoked. Consult system administrator of server facility.
EDA32066 USER LACKS ADMINISTRATOR PASSWORD - SQL SET COMMAND REJECTED
An attempt was made to issue an SQL SET command to the server, but the requesting user's password does not match the Administrator's password. Only the Administrator may issue SQL SET commands to the server.
EDA32067 BEGIN EXECUTING CLIENT's REQUEST
EDA32068 ERROR MESSAGE TEXT MISSING 32068
EDA32069 REMOTE COMMAND OR SET NOT SPECIFIED
The desired REMOTE command or set was not specified on the same line as the REMOTE keyword. This is required by the current release of the FOCUS client software.
EDA32070 REMOTE COMMAND OR SET NOT SUPPORTED %1
The requested command or setting is not supported by the current release of this FOCUS client software. Command is ignored.
EDA32071 REMOTE SET REQUIRES EQUAL SIGN
The REMOTE settings now require that a single '=' be used for each of the available settings. In previous releases, this had been optional.
EDA32072 %1
Miscellaneous message.
EDA32073 ERROR AT OR NEAR LINE %1 IN PROCEDURE %2
An error has occurred parsing a procedure.
EDA32074 BYPASSING TO END OF COMMAND
Skipping forward to END statement.
EDA32075 NUMBER OF ERRORS= %1
EDA32076 NUMBER OF SEGMENTS= %1 ( REAL= %2 VIRTUAL= &3 )
EDA32077 NUMBER OF FIELDS= %1 INDEXES= %2 FILES= %3
EDA32078 UMBER OF DEFINES= %1
EDA32079 TOTAL LENGTH OF ALL FIELDS=',I5)
EDA32080 NUMBER OF RECORDS IN TABLE= %1 LINES= %2
EDA32081 (BEFORE TOTAL TESTS)
EDA32082 (BEFORE CARTESIAN PRODUCT)
EDA32083 (BEFORE CARTESIAN PRODUCT AND TOTAL TESTS)
EDA32084 (BEFORE DISTINCT TESTS)
EDA32085 ACCESS LIMITED BY PASSWORD
EDA32086 ACCESS LIMITED BY FILTERS
EDA32087 ..RETRIEVAL KILLED
EDA32088 HOLDING %1
EDA32089 AGGREGATION DONE ...
EDA32090 NUMBER OF RECORDS SELECTED= %1 LINES= %2
EDA32091 LINES OF MATCH OUTPUT = %1
EDA32092 - EDA32096 Reserved for Client MSG Project
EDA32097 TRANSACTIONS: TOTAL= %1 ACCEPTED= %2 REJECTED= %3
EDA32098 SEGMENTS: INPUT= %1 UPDATED = %2 DELETED = %3
EDA32099 LOGICAL TRANSACTIONS: COMMIT= %1 ROLLBACK= %2
EDA32100 REXX function returned non-zero return code. RC= %1
REXX function returned non-zero return code. This is probably due to incorrect calling parameters on a REXX function.
EDA32101 REXX function did not return an EVALBLOK
REXX macro should exit with "EXIT RC" or "RETURN some_data". Functions MUST return at least 1 byte of data.
EDA32102 REXX buffer length error.
User RETURN buffer MUST be 1 to 256 in length. This may also be an error in defining the INPUT parms. All REXX parms must be defined in LENGTH/ADDRESS pairs.
EDA32103 Input parms not paired.
INPUT and OUTPUT parms must be defined in LENGTH/ADDRESS pairs.
EDA32105 NO DIRECTORY NAME SPECIFIED
EDA32106 SPECIFIY DIRECTORY NAME ONLY
EDA32107 ALL DIRECTORIES REMOVED
EDA32108 DIRECTORY DELETED FROM LIST
EDA32109 DIRECTORY NOT FOUND
EDA32111 DIRECTORY OMITTED
EDA32112 ERROR PARSING DIRECTORY
EDA32113 DIRECTORY ALREADY DEFINED
EDA32114 NO READ AUTHORIZATION TO DIRECTORY
EDA32115 NO WRITE AUTHORIZATION TO DIRECTORY
EDA32116 UNKNOWN OPTION - ISSUE SFDIR ?
EDA32117 FILE 'VMDYN CONFIG *' NOT FOUND
VMDYN CONFIG is shipped with FOCUS/EDA. This is actually a REXX program which interfaces with DYNAM command on CMS. This file is required for operation.
EDA3218x - EDA32153 MESSAGE RESERVED FOR REXX NUMBER
EDA32154 FOCSORT FOCTEMP has been allocated &&1 pages /
A DATASPACE has been created for FOCSORT FOCTEMP. The name of the DATASPACE is $FOCTMP$. On VM issue CP QUERY SPACES PERM for info. Also issue CP DISPLAY ACCLIST for access list file.
EDA32155 FOCSORT FOCTEMP has exceeded the size allocated in the DATASPACE
DSQUERY ERRORS may be copied to your disk and the parameter for FOCTEMP can be updated. This allows each used the flexability to define the size of FOCSORT as needed.
EDA32156 - EDA32157 MESSAGE RESERVED FOR REXX NUMBER
EDA32158 UNABLE TO PARSE PARMS FOR &&1 AT LINE &&2 IN &&3 &&4
The parms or options for the keyword specified at the line specified were found to be in error. Check the examples in the CONFIG file. You may have specified an invalid word or extra parameter.
EDA32159 UNKNOWN KEYWORD &&1 AT LINE &&2 IN file &&3 &&4
An unknown keyword was specified in the configuration file. Please check for an error at the line specified. You may have mistyped a CONFIG file keyword. This is the first parm in the line specified.
EDA32160 WARNING: DATABASE ATTRIBUTES DO NOT MATCH CURRENT VALUES
Database attributes are stored in the data space. These attributes do not match the current attributes obtained. The data space will be destroyed and recreated based on the new attributes.
EDA32161 WARNING: DATASPACE OVERFLOW &1 &2 &3
The size of the databases was insufficient to contain the database record requested. Processing continues, but the database record was not cached. You may want to increase the WRITESIZE parameter in DSQUERY ERRORS.
EDA32162 QUERY ERROR. USERID MAY NOT BE CONFIGURED FOR DATASPACE USEAGE
This userid may not be authorized for data space usage. See your directory administrator for data space authorization and add a personal copy of DSQUERY ERRORS to your "A" disk for faster data space access.
EDA32163 DATASPACE USE REQUIRES USERID TO BE IN XC MODE
DATASPACE usage requires the virtual machine to be in XC mode. Issue 'SET MACHINE XC' from the CMS command line and RE-IPL CMS.
EDA32164 FOCUS FILE NOT FOUND ON ANY ACCESSED DISK
A command was entered which specified a FOCUS database, but the database was not found.
EDA32165 NO DATASPACE LIST EXISTS
A command was entered which examines the DATASPACE list, but no list is currently defined.
EDA32158 - EDA32164 MESSAGE RESERVED FOR REXX NUMBER
EDA32165 NO WRITEABLE TEMP DISK FOUND. ISSUE SET TEMP TO WRITEABLE DISK.
During initialization, all disk modes are searched for a default disk which will be set as TEMP. All disk modes examined were found to be read-only. Define a READ/WRITE disk and issue: SET TEMP= mode.
EDA32166 DYNAM PARSE ERROR
A internal error occurred while parsing the DYNAM command. This may occur because of storage problems. Change syntax of command and reissue.
EDA32167 KEYWORD AFTER FREE MISSING: DDNAME, FILENAME, DSNAME, DATASET
The DYANM FREE command requires one of the following keywords: DDNAME, FILENAME, DSNAME, DATASET. Check the command for SYNTAX error.
EDA32168 DYNAM KEYWORD "&&1" IS UNSUPPORTED ON THIS PLATFORM
A DYNAM command was issued which is not supported on this platform.
EDA32169 CONCATENATION FAILED: USE DYNAM ALLOC WITH CONCAT OPTION
DYNAM CONCAT is not supported on this platform. Use DYNAM ALLOC with CONCAT as an option.
EDA32170 UNABLE TO ISSUE DYNAM FREE COMMAND
A internal error caused the DYNAM FREE command to fail. Check the command for SYNTAX error.
EDA32171 DEVICE OPTIONS NOT ALLOWED ON FREE
DYNAM FREE does not allow DEVICE options to be specified.
EDA32172 NO EXTENDED OPTIONS ALLOWED ON FREE
DYNAM FREE does not allow extended options to be specified.
EDA32173 DDNAME NOT ALLOWED WITH DIRECTORY AS MODE
The DDNAME can not be specified when the FILEMODE is a Shared File Directory (SFS).
EDA32174 NO DDNAME OR DATA SET NAME GIVEN
The DDNAME or DATASET name was not specified. Check the command for SYNTAX error.
EDA32175 UNABLE TO ISSUE DYNAM ALLOC COMMAND
An internal error caused the failure of the DYNAM command. This may be a STORAGE error or a SYNTAX error. Check for SYNTAX.
EDA32176 OPTION NOT ALLOWED WHEN SFS IS SPECIFIED AS FMODE
The OPTION can not be specified when the FILEMODE is a Shared File Directory (SFS). These OPTIONs include: PERM, CONCAT, MOD, DEVICE, BLKSIZE, etc.
EDA32177 COMMAND REQUIRES FMODE OR DIRECTORY NAME
DYNAM command on VM requires a FILEMODE or a DIRECTORY for Data Set Name (DSN).
EDA32178 COMMAND REQUIRES FNAME AND FTYPE
DYNAM command on VM requires a FILENAME and FILETYPE for Data Set Name (DSN).
EDA32179 NO DDNAME NAME GIVEN
DDNAME was not specified. Check the command for SYNTAX error.
EDA32180 KEYWORD AFTER ALLOC MISSING: DDNAME, FILENAME, DSNAME, DATASET
The command DYNAM ALLOC requires DDNAME, FILENAME, DSNAME, or DATASET as a keyword before any other parms.
EDA32181 DDNAME NOT ALLOCATED
A DYNAM FREE was issued for a DDNAME that was not already allocated.
EDA32182 DATASET NOT ALLOCATED
A DYNAM FREE was issued for a DATASET that was not already allocated.
EDA32183 DSNAME OR DATASET OPTION NOT ALLOWED WITH DEVICE OPTION
The DEVICE option does not allow a DATASET or DSNAME to be specified. Reissue DYNAM with NO DATASET or DSNAME. You may also DROP the DEVICE option.
EDA32184 DEBUG OPTION ALREADY SPECIFIED
The DEBUG option has already been specified. Check the command for SYNTAX error.
EDA32185 OUTPUT DEVICE ALREADY SPECIFIED
The OUTPUT DEVICE option has already been specified. Check the command for SYNTAX error.
EDA32186 READ ALREADY SPECIFIED
The READ option has already been specified. Check the command for SYNTAX error.
EDA32187 RECFM MUST BE "F", "V", OR "U"
The RECORD FORMAT specified must be <F>ixed or <V>ariable or <U>ndefined.
EDA32188 RECFM ALREADY SPECIFIED
The RECFM option has already been specified. Check the command for SYNTAX error.
EDA32189 LRECL ALREADY SPECIFIED
The LRECL option has already been specified. Check the command for SYNTAX error.
EDA32190 BLKSIZE ALREADY SPECIFIED
The BLKSIZE option has already been specified. Check the command for SYNTAX error.
EDA32191 CONCAT ALREADY SPECIFIED
The CONCAT option has already been specified. Check the command for SYNTAX error.
EDA32192 MOD ALREADY SPECIFIED
The MOD option has already been specified. Check the command for SYNTAX error.
EDA32193 PERM ALREADY SPECIFIED
The PERM option on the DYNAM command has already been specified. Check the command for SYNTAX.
EDA32194 DATA SET NAME ALREADY SPECIFIED
The Data Set Name (DSN) was already specified in the DYNAM ALLOCATE command already. Check the command for SYNTAX.
EDA32195 DDNAME ALREADY SPECIFIED
The DDNAME in the DYNAM ALLOCATE command was specified once in the command already. Recheck SYNTAX.
EDA32196 UNKNOWN KEYWORD &&1 SPECIFIED
A word in the DYNAM command is not understood or is out of order. Check the command for SYNTAX.
EDA32197 SFS DIRECTORY ALREADY DEFINED
A request to ALLOCATE a Shared File Directory (SFS) was made, but that entry already exists.
EDA32198 SFS FILE NOT ALLOCATED
A request to FREE a Shared File Directory (SFS) was made, but that entry does not exist.
EDA32199 UNKNOWN DYNAM VERB
The DYNAM command was issued using a VERB or KEYWORD that the parser does not understand.
EDA32200 TOO MANY FILES OPEN SIMULTANEOUSLY
The number of files currently OPEN has exceeded the current limit. This generally happens when IO is being done to many different DDNAMES at the same time, without a CLOSE.
EDA32401 CORE MANAGEMENT INITIALIZATION FAILURE
EDA32402 SERVER HERMES OPEN FAILED
EDA32403 SERVER HERMES SET FAILED
EDA32404 SERVER HERMES ON FAILED
EDA32405 SERVER HERMES FAILED DURING EXECUTION
EDA32406 COMPILE and RUN supported by EDA only for DB2
Under FOCUS, COMPILE and RUN are used (respectively) to compile a MODIFY procedure and to run such a compiled MODIFY. Under EDA; the only support for COMPILE and RUN is through SQL SET STATIC ON SQL SET STATIC NOBIND.
EDA32407 Too many fields in MASTER(s), DEFINE(s), internal ...
The total number of fields in all MASTERs used (including those for JOIN) plus any additional fields for DEFINEs or internal features (page numbering, etc.) exceeds 3072. (This message may be issued by REBUILD if the value of BINS is very low.)
EDA32408 BY HIGHEST/LOWEST n: n should be positive
EDA32409 A permanent PASS is in effect. Your PASS will not be honored.
EDA32410 TILES: MORE THAN 1 IN-GROUPS-OF n TILES
EDA32411 TILES: n in IN-GROUPS-OF n TILES is too large
EDA32412 TILES: IN-GROUPS-OF n TILES TOP m - wrong values m and n in request are required to be positive
EDA32413 TILES are not supported with BY TOTAL
EDA32414 TILES are supported only in TABLE request
EDA32415 BY TOTAL and ACROSS: BY TOTAL key cannot be COMPUTEd
EDA32416 TITLE are suported only with IN-GROUPS-OF
EDA32417 GAUGE1 CHARTS CANNOT HAVE MORE THAN ONE SERIES
EDA32418 LENGTH OF FOCEXURL VALUE IS ZERO
EDA32419 Problem with JSCOM3 execution of HOLD FORMAT IMAGE
EDA32420 IBIJAVAPATH is not set
You must set up IBIVAAPATH, JSCOM3, or, GRAPHSERVURL to HOLD a graph.
EDA32421 WARNING: SORTING ON A COMPUTED FILED %
This request is attempting to sort on a COMPUTEd field. This is typically not advised since sorting occurs prior to the formatting phase and COMPUTEs are applied afterwards.
EDA32422 VALID VALUES ARE GRAPEENGINE=GRAPH53, GRAPH32, NEW, OR OLD
EDA32423 MORE WITHIN AN FML REQUEST IS NOT SUPPORTED
The rules for the MORE command and FML are compatible, there fore this request cannot be completed.
EDA32424 DYTRACE REPORT: %1
DYTRACE report shows an accumulated count of DYNAM commands and resultant SVC99 calls. The base for the ocunt is the most recent activism of DYTRACE, or the beginning of the session if DYTRACE is inactive.
EDA32425 GAUGE2 CHARTTYPE IS NOT SUPPORTED IN THIS RELEASES
EDA32426 INVALID USE OF ACCESS_PROP: %1
Properties VALUE, RANGE, and MULTIVALUES are mutually exclusive.
EDA32427 APPLICATION NAME CAN'T BE LONGER THAN %1 CHARACTERS: %2
EDA32428 APPLICATION'S NAME INVALID: %1
EDA32429 USER HAS NO RIGHTS TO EXECUTE %1
EDA32450 INVALID FILE MODE IN REBUILD REQUEST
When FN FT FM is specified in REBUILD, FM (file mode) can not be a wildcard. Please, specify a valid drive letter.
EDA32451 Max of 255 across instances in online report exceeded
This limit does not apply to HOLD files. Consider generating a HOLD file instead.
EDA32452 Use of ALL. with LEFT_OUTER/INNER not allowed
EDA32453 RIGHT_OUTER joins only supported for SQL databases
EDA32454 MAXIMUM HAXIS/VAXIS VALUE OF SVG CHARTS WITH IN UNITS IS 40
Maximum allowable HAXIS and HAXIS values for SVG graph charts using INCHES as units are 40. Example: SET HAXIS=40, UNITS=IN
EDA32455 MAXIMUM HAXIS/VAXIS VALUE OF SVG CHARTS WITH CM UNITS IS 102
Maximum allowable HAXIS and HAXIS values for SVG graph charts using centimters as units are 102. Example: SET HAXIS=102, UNITS=CM
EDA32456 ANSI-COMPLIANCE ENFORCED BY CHANGING OUTER JOIN TO INNER
A left outer join in the root-path of an inner join has been changed into an inner join.
EDA32457 Y AXIS MAY NOT CONTAIN A DATE FIELD AND A NON-DATE FIELD.
Combining date and non-date fields on the Y-axis of WebFOCUS graphs is not currently supported.
EDA32458 Y AXIS MAY NOT CONTAIN DATE FIELDS WITHOUT YEARS AND WITH YEARS.
It is not possible to caculate a Y Axis scale from the resultant data.
EDA32457 XX