Messages 18001

Messages 18001 - 18800

Jump to:

EDA18100 Error in Check Point test: I/O Failed

EDA18200 %1 Rollback forced at: %2 for %3 rows

EDA18300 Unable to determine iWay communication sub-system

EDA18400 Target Load Error - FOC ERROR: %1

EDA18500 HOLD FILE LOAD FAILED

EDA18600 Alias is too long; limit is 59 characters

EDA18700 * Contact Information Builders for NLS correction.

EDA18001 Scheduler Type: Run Once

EDA18002 Scheduler Type: Recurring; Continuous Type.

EDA18003 Scheduler Type: Recurring; Discrete Type.

EDA18004 Schedule Type: Mulit-Days

EDA18005 Scheduler Start: %1

EDA18006 Scheduler Stop: %1

EDA18007 CPU Time: %1

CPU Time

EDA18008 Schedule Type: Unknown

EDA18009 Schedule interval: Every %1 Minutes(s)

EDA18010 Schedule interval: Every %1 Hours(s)

EDA18011 Schedule interval: Every %1 Day(s)

EDA18012 Schedule interval: Every %1 Week(s)

EDA18013 **** DM Server install failed ****

The DM Server installation failed.

EDA18014 DM Server install finished for %1. Run %2 to load IVPX

The DM Server installation has finished for FOCUS. Run STEP2 to load IVPX.

EDA18015 %1: procedure %2 started

Procedure as dependency started.

EDA18016 Request %1/%2%3

Please, wait for request to complete.

EDA18017 Submitted for deferred; Restart %1 from the beginning

EDA18018 Submitted for deferred; Restart %1 from last commit point %2;

EDA18019 Failed to submit Stored Procedure.

Procedure cannot have the same name as the calling ETL request.

EDA18020 Procedure cannot have the same name as the calling request.

The Manager internal tables could not be created or recreated.

EDA18021 Submitted immediately; Restart %1 from last commit point %2;

EDA18022 Failure: DB2 DBSPACE has not been defined. Use %1

Failure: DB2 DBSPACE has not been defined. Use CMPROF FOCEXEC to define it.

EDA18023 Submitted for

EDA18024 Submitted immediately.

EDA18025 Submitted; Restart %1 from last commit point %2;

EDA18026 Submitted; Restart %1 from the beginning

EDA18027 %1: flow %2 started.

Flow as dependency started.

EDA18028 Submitted

ICM18029 Parent JOB ID: %1;

EDA18030 RC from CREATE STOGROUP %1 : %2

The return code from the create storage group that was previously executed.

EDA18031 Finished

EDA18032 User %1 Not authorized to stop DM Schedule

EDA18033 Parent Job %1; Dependency %2

EDA18034 Deferred request %1/%2

EDA18035 Submit request %1/%2

EDA18036 Request %1/%2 finished

EDA18037 Request %12 failed; RC = %2.

The return code from the Create Database was not zero. An error occurred when trying to create the database.

EDA18038 Request %1 completed.

EDA18039 RC from GRANT DBADM for %1 : %2

The return code from the GRANT DBADM on the DB2 Database.

EDA18040 Failure issuing GRANT DBADM for %1 RC = %2

The return code on the GRANT DBADM command was not zero. An error occurred when trying to grant the DBADM privileges.

EDA18041 Issuing DROP TABLESPACE for %1

The DB2 TABLESPACE will be dropped with a DROP TABLESPACE Command.

EDA18042 Procedure %1 is not found in CMSCHED

EDA18043 Issuing CREATE TABLESPACE for %1

A DB2 Tablespace is being created by issuing the CREATE TABLESPACE command.

EDA18044 Procedure %1 is being migrated

EDA18045 Error to migrate procedure %1

EDA18046 Error read %1 synonym

EDA18047 Out of memory.

EDA18048 Error to migrate table %1

EDA18049 Error to read table %1

EDA18050 No more record: %1

EDA18051 Error to read segment %1

EDA18052 Issuing DROP INDEX for %1 %2 table

Issuing a DROP INDEX for the table.

EDA18053 Field %1 is not found in synonym %2

EDA18054 Issuing CREATE and DROP TABLE for %1

Issuing a CREATE and DROP Table for the table.

EDA18055 RC for DROP %1 : %2

The return code for the DROP TABLE that was previously executed.

EDA18056 Issuing CREATE TABLE for %1

CREATE TABLE for Target table was issued against the relational database.

EDA18057 %1 RC for CREATE TABLE %2 : %3

Return Code for the CREATE TABLE that was previously executed.

EDA18058 %1: Failure on %2 COMMIT RC = %3

There was a COMMIT FAILURE when trying to issue a COMMIT.

EDA18059 **** Failed to re/create internal tables ****

The DataMigrator internal tables could not be created or recreated.

EDA18060 Day(s) of the Week : %1

EDA18061 Day(s) of the Month:%1

EDA18062 %1

EDA18063 %1: Failure in load of %2 details

There was a failure in the procedure, during the load of the table details.

EDA18064 %1: Failure in load of request %2

There was a failure in the procedure. Could not load the request.

EDA18065 %1: SINK MACHINE is up

The SINK MACHINE is running.

EDA18066 Start : Inserting values into table %1

Starting to insert values into the table.

EDA18067 End : Inserting values into table %1

End of inserting values into table.

EDA18068 %1: Failure to retrieve from %2

There was an error in the Procedure listed. There was a failure to retrieve from the file listed.

EDA18069 Error to migrate procedure %1.

EDA18070 %1: Failure in test load to %2

There was a failure in the procedure listed. The table could not be loaded.

EDA18071 %1: Failure to insert record to %2

There was a failure in the procedure. A record could not be inserted into the table.

EDA18072 Elapsed run time

EDA18073 Failure issuing DB2 SET DBSPACE DATABASE for %1

Failure issuing DB2 SET SBSPACE DATABAS.

EDA18074 RC = %1

Failure issuing DB2 SET SBSPACE DATABAS. The return code is listed.

EDA18075 %1: Failure on %2 CREATE

Error on CREATE TABLE. For Quick Copy, a problem occurred when a new table was being created. Does the user have sufficient authority? Is the database subsystem available? Is the three- or two-part name specified correctly?

EDA18076 Request: %1 - finished processing

The request has finished processing.

EDA18077 Warning. Non-zero iWay return code detected: RC = %1

Warning. Non-zero iWay return code detected.

EDA18078 %1

EDA18079 Error reading job statistics

Incorrect job statistics posted.

EDA18080 JOB ERROR I/O Error reading statistics

There was an error reading the job statistics. Incorrect job statistics posted.

EDA18081 Job incomplete - End Date/Time/Return Code not found

Job incomplete - End Date/Time/Return Code not found.

EDA18082 Incomplete log file written to log database

Internal failure in log capture mechanism. CMLOG. EMGSRV command.

EDA18083 EMGSRV failure in CMLOG

Internal failure in log capture mechanism. CMLOG. EMGSRV command.

EDA18084 Error checking for complete log file

Error checking for complete log file.

EDA18085 Non-zero return code returned from job process

Non-zero return code returned from job process.

EDA18086 Error: Incomplete log file was returned

Error accessing ETL Manager internal database for dependencies. Usually caused by a configuration or security access error.

EDA18087 BAD EDA STATUS code found in job log file: %1

Error in the console report.

EDA18088 User forced job termination. Skipping dependencies.

The user forced the job termination. Dependencies will be skipped.

EDA18089 No dependencies found

There were no dependencies found.

EDA18090 No more dependencies to run

There are no dependencies to run.

EDA18091 Dependent request # %1 for %2 started: %3

The dependent request for the original ETL request was found and started.

EDA18092 Failed Request. Skipping dependencies.

Failed Request. Skipping dependencies.

EDA18093 Error obtaining end date/time/return code from STATS

Error obtaining end date/time/return code from CMSTATS.

EDA18094 User termination via KILL_RPC flag

ETL request was terminated because KILL_RPC was set in a stored procedure.

EDA18095 %1 Return Code when accessing database: %2

Return Code when accessing database.

EDA18096 Error in Check Point determining CM_ERROR status

Error in Check Point determining CM_ERROR status.

EDA18097 Error in Check Point stop test

Error in Check Point stop test.

EDA18098 Job ending at users request

Job ending at users request.

EDA18099 Error in Check Point safety test

Error in Check Point safety test.

EDA18100 Error in Check Point test: I/O Failed

Error in Check Point test: I/O Failed.

EDA18101 %1 LOAD failed

The load failed. CMLOG stats. Error in start time MODIFY. Could be due to incorrect configuration or invalid security. CMSTATS table unavailable.

EDA18102 %2 RDBMS error: %2

A RDBMS error occurred.

EDA18103 Error in Check Point test: INSERT Failed

Error in Check Point test: INSERT failed.

EDA18104 Error in Check Point test: Unexpected update

There was an error in the Check Point procedure. There was a duplicate update.

EDA18105 DELETE FROM: %1 table: %2 executed

DELETE FROM Target Table has been executed. This will delete rows prior to insert.

EDA18106 RC from DELETE FROM: %1 table: %2 code: %3

The Return Code from the DELETE FROM that was executed on the Target table follows.

EDA18107 ******* Scheduler Started *******

The Scheduler / Recovery has started.

EDA18108 Approximate Sleep period: %1:%2 min:sec

The approximate sleep period is listed.

EDA18109 Wake mode: Searching for Scheduled Copy Requests

Searching for Request.

EDA18110 %1 Intervals missed before completing search

An interval was missed before completing the search.

EDA18111 Critical failure in scheduler.

Critical failure in scheduler - CMP error code and text follow.

EDA18112 Sleep period: %1.%2 [min.sec]

The duration for which the scheduler will sleep.

EDA18113 Sunday

EDA18114 EMGSRV problem in NGHLOG

Problem closing the CMLOG message collection file EMGSRV.

EDA18115 Partial log: File= %1 Lines= %2 NGHSEQ= %3

Retrieval error CMNGHLOG. Internal error.

EDA18116 %1: error in DEFINE

There was an error in the calculations columns of ETL Manager. This is an internal error.

EDA18117 %1: error obtaining CMPARMS: FOCUS = %1 RDBMS = %2

There was an error obtaining parameters. This usually means there is a disk access I/O error.

EDA18118 There are %1 DM requests scheduled to run on %2

There are already DM requests scheduled to run on the date request.

EDA18119 DM Requests scheduled to run at this time: %1

The DM Requests are scheduled to run at a specified time.

EDA18120 Request aborted: %1 is missing

The request has been aborted. A parameter is missing.

EDA18121 Number of active DM Requests: %1 Total Limiter: %2

The number of active DM Requests.

EDA18122 DM request - %1 (Owner: %2) submitted.

The DM Request has been submitted by the owner.

EDA18123 Interval submission limit reached: %1 Attempting retry

Interval submission limit reached. Attempting to retry.

EDA18124 No submission of Request.User supplied interval limiter

Request not submitted due to user supplied interval limiter.

EDA18125 Processed %1 of %2 DM Requests

The number of DM Requests that have been processed.

EDA18126 Failure: Unable to read %1 %2 file

Failure: Unable to read the file. CMREAD. Parameters unavailable. Request cannot start.

EDA18127 EDA AUTODISC error

Error on EDA disconnect (from the subserver). Communication error.

EDA18128 RDBMS AUTOCLOSE error

AUTOCLOSE error. Error closing thread to relational DBMS.

EDA18129 RDBMS COMMIT error

Error on commit to RDBMS.

EDA18130 EDA MODE NOWAIT error

Error establishing NOWAIT parameter.

EDA18131 Warning. Non-zero EDA return code detected: RC = %1

Warning. Non-zero EDA return code detected: RC = nnnn.

EDA18132 %1ETL Request aborted: Same ETL Request still active/failed

ETL Request aborted: Same ETL Request still active/failed. Run CMRESET with the parameters listed to reinitialize.

EDA18133 %1Run %2 w/the following parameters to reinitialize

ETL Request aborted: Same ETL Request still active/failed. Run CMRESET with the parameters listed to reinitialize.

EDA18134 (1.3) ETL Request UID = %1 CR = %2, CRID = %3

ETL Request aborted: Same ETL Request still active/failed. Run CMRESET with the parameters listed to reinitialize.

EDA18135 Failed on %1 HOLD file allocation

There was an error creating HOLD file allocation. This hold file creates control, log, or command files. FTP technique is used. Is disk space available? Does the user have access to the temp space?

EDA18136 EDA AUTOCLOSE error

Error on EDA disconnect (from the subserver). Communication error.

EDA18137 CHECK FILE failed: generating columns for selective update

The check file failed while generating columns for selective update.

EDA18138 User specified selective update. no columns to update

The user specified a selective update. There are no columns to update.

EDA18139 Error opening in memory focexec: %1

Error opening in memory focexec.

EDA18140 Attempt to generate selective update failed.

The attempt to generate selective update failed.

EDA18141 Error closing DAT file: %1

Error closing DAT file.

EDA18142 CM_SHARE variable error

CM_SHARE variable error.

EDA18143 CHECK FILE %1 failure?: MFD may not have been located

Failure in CHECK FILE HOLD command. CMNEWMAS. This is usually a configuration error. Check allocations of Master, EDASYNM, and Holdmast or TEMP directories.

EDA18144 CHECK FILE %1 failure?: MFD not found or is unreadable

Error retrieving from HOLD file created by CHECK FILE HOLD.

EDA18145 No records in CMMASK

There are no records in CMMASK.

EDA18146 Error in CMMASK retrieval

There was an error while trying to retrieve CMMASK.

EDA18147 Invalid mask pairings?

CMMASK is used. Error is in configuration of user mask pairings. There must be two lines for each pair: the identification mask and the edit mask.

EDA18148 Process error %1. (%2)

This message identifies a possible problem in the rebuilding of iWay descriptions as ETL Manager looks for duplicate columns and invalid names and performs truncations and user maskings. Usually a disk space, access, or configuration problem.

EDA18149 Process error %1.

EDA18150 Blank alias and fieldname in this MASTER

EDA18151 Short column HOLD error. (%1)

The message identifies a possible problem in the rebuilding of iWay descriptions. A field that was truncated is not unique.

EDA18152 CMNEWMAS final HOLD error. (%1)

EDA18153 CMNEWMAS allocation error (%1)

EDA18154 ETL %1 error

EDA18155 Adjusted master and access files created

The adjusted Master file description and access file have been created.

EDA18156 Parsing/Validating column names...

Parsing and/or validating column names.

EDA18157 Error-Missing parms writing/updating Request: %1 for User: %2

There was an error writing or updating the request for the user. There were parameters missing.

EDA18158 About to delete request details: %1

The request details are about to be deleted.

EDA18159 Details for request deleted: %1, for Request: %2, for User: %3

The details for the ETL request were deleted for the specific user.

EDA18160 ETL Request details successfully written : %1 for User: %2

The details of the ETL request for the user were successfully written.

EDA18161 Updating ETL Request static data : %1 for User: %2

Updating the static data for the ETL request.

EDA18162 Error saving request: %1, User: %2

There was an error saving the request.

EDA18163 Done deleting: %1 for User: %2

Done deleting the request.

EDA18164 Request %1 %2 was created/updated successfully for User: %3.

EDA18165 Request info deleted: %1, %2 User: %3

The request information has been deleted.

EDA18166 Request info written: %1, %2 User: %3

The request information has been written.

EDA18167 Target name written: %1, %2 User: %3

The target name has been written.

EDA18168 Incorrect Version of ETL Client! Use 3.2ccR2.

The incorrect version of the ETL client is installed. Use release 3.2ccR2.

EDA18169 Error in delete, missing parameter(s) - Request: %1, User: %2

An error occurred while trying to delete. A parameter is missing.

EDA18170 Error deleting: %1, User: %2 - Request not in database

The request was not in the database. It could not be deleted.

EDA18171 Complete deleting: %1 for User: %2

The request has been deleted.

EDA18172 Deleting ETL request file: %1, for request: %2, for User: %3

Deleting the ETL request file.

EDA18173 iWay temp path too long to invoke file transfer

The iWay temporary path is too long to invoke the file transfer. Shorten it using variables.

EDA18174 EMAIL retrieve deps error

EMAIL retrieved a deps error.

EDA18175 I/O Error on CMM02DEP read

There was an I/O error on CMM02DEP read.

EDA18176 Serious error occurred in migration configuration/verification

A serious error occurred in the migration configuration or verification.

EDA18177 Monday

EDA18178 Tuesday

EDA18179 Wednesday

EDA18180 Thursday

EDA18181 Friday

EDA18182 Saturday

EDA18183 Error checking for BAD EDA STATUS codes

Error checking for BAD EDA STATUS codes.

EDA18184 Contention problem - %1 not updated

Contention problem. Request not updated. It is possible that the request is being updated by someone else.

EDA18185 Contention problem - %1 already exists

Contention problem. Request already exists.

EDA18186 Incorrect Target - Check CMTARGET listing:%1

The target is incorrect. Check the CMTARGET listing.

EDA18187 Invalid nomatch error in CASE1

There is an invalid nomatch error in CASE1.

EDA18188 New User and Request INSERTed

The new user and request have been inserted.

EDA18189 New Request INSERTed

The new request has been inserted.

EDA18190 New Request Detail Line INSERTed

The new request details line has been inserted.

EDA18191 Contention problem - User/Request already exist

There was a contention problem. The user of the request already exists.

EDA18192 Contention problem - Detail Line already exists

There was a contention problem. The detail line already exists.

EDA18193 Error processing request:%1 not deleted

There was an error in processing the request. The request was not deleted.

EDA18194 Contention failure - %1 %2 not deleted

There was a contention failure.

EDA18195 ?:Unknown platform - please specify - CMNGHLOG.FEX

EDA18196 Contention - %1 not included

EDA18197 CMLOG2 commit forced at: %1 for %2 rows

EDA18198 %1 EOF: Last row read from input stream

End of file has been reached. The last row of read from input has been read.

EDA18199 %1 Commit forced at: %2 for %3 rows

Commit forced for specified row.

EDA18200 %1 Rollback forced at: %2 for %3 rows

Rollback forced at specified row.

EDA18201 Building bulk load control file

Building bulk load control file.

EDA18202 Aborted. I/O error or no target table columns to load

Aborted. I/O error or no target table columns to load.

EDA18203 CMBLKTRA: Failed in bulk load I/O

Failed in bulk load I/O. Problem writing files needed for bulk loader.

EDA18204 Aborted. I/O error or no target table columns to load

Aborted. I/O error or no target table columns to load.

EDA18205 Bulk load control file built

Bulk load control file built.

EDA18206 Building bulk load command file

Building bulk load command file.

EDA18207 Failed on CHECK FILE HOLD file in bulk load

Failed on CHECK FILE HOLD file in bulk load. HOLD file from SYSCOLUM failed. Usually a configuration catalog error. Bulk copy strategy is being used.

EDA18208 Incoming data contains unsupported datatype

Incoming data contains an unsupported data type. HOLD file from SYSCOLUM failed. Usually a configuration catalog error. Bulk copy strategy is being used.

EDA18209 Default SQL Server Version number for control file: %1

The default SQL Server Version is being used because no version was supplied.

EDA18210 Bulk load command file built

Bulk load command file built.

EDA18211 Default Oracle Version supplied for control file: %1

The Default ORACLE Version is being used because no version was supplied.

EDA18212 Building bulk load control file - Import Specification File

Building bulk load control file - Import Specification File.

EDA18213 Bulk load control file built - Import Invocation File

Bulk load control file built - Import Invocation File.

EDA18214 Building bulk load command file - Import Invocation File

Bulk load control file built - Import Invocation File.

EDA18215 Bulk load command file built - Import Invocation File

Bulk load command file built - Import Invocation File.

EDA18216 Starting bulk load procedure

Starting bulk load procedure.

EDA18217 iWay temp path too long to invoke bulk load, shorten path w/var

Shorten the path with variables.

EDA18218 Substituted %1 name can't exceed 64 char for quick copy

The Bulk table name cannot exceed 64 characters for quick copy. Shorten the name of the table.

EDA18219 Target RDBMS not specified for bulk load

The Target RDBMS is not specified for the bulk load.

EDA18220 Undefined target table for bulk load

The target table is not defined for the bulk load.

EDA18221 Required parameters are missing: %1

Required parameters are missing. Nucleus requires specification of userid, database, and password.

EDA18222 Attempting to DROP %1 Table %2

Attempting to DROP Table in the location listed.

EDA18223 DROP SYNONYM executed for: %1

The DROP SYNONYM was executed for the Table.

EDA18224 RC from DROP SYNONYM: (FOC%1)

This is the return code from the DROP SYNONYM that was executed.

EDA18225 *** Request Failed ***

**** Request Failed *****

EDA18226 DROP SYNONYM ERROR.

DROP SYNONYM error. Synonym name is too long. The MFD could not be erased because the AFD doesn't exist, or the AFD could not be erased because the MFD doesn't exist. Make the correction and try again.

EDA18227 CREATE TABLE for: %1, table: %2, issued

CREATE TABLE for target table has been issued.

EDA18228 RC from CREATE TABLE: %1, table: %2, code: %3

The return code from CREATE TABLE command for the Target table. The return code is listed.

EDA18229 CREATE TABLE ERROR

There was an error when issuing the CREATE TABLE for the TARGET Table. Does the user have sufficient authority? Is the database sub-system available? Is the three- or two-part name specified correctly?

EDA18230 Using standard allocation for bulk load control file

Using standard allocation for bulk load control file.

EDA18231 Failed on %1 HOLD file allocation

Failure on HOLD extract that creates control, log, or command files. FTP technique is used. Is disk space available? Does the user have access to the temp space?

EDA18232 Allocating bulk load command file

Allocating bulk load command file.

EDA18233 Creating bulk load runner for command file

Creating bulk load runner for command file.

EDA18234 Bulk load not executed - at users request

Bulk load not executed at users request.

EDA18235 Running user supplied bulk load command file

Running user supplied bulk load command file.

EDA18236 Reading RDBMS load output file %1

Reading RDBMS load output file.

EDA18237 Ending bulk load procedure

Ending bulk load procedure.

EDA18238 Resolving DM Server temporary space for CMJOB service

Resolving DM Server temporary space for CMJOB service.

EDA18239 Temporary directory for CMJOB process follows on next line

The temporary directory being used for the CMJOB process follows on the next line.

EDA18240 Check point -INCLUDE cascade exceeded - 4 max: %1

The maximum -INCLUDEs is 4. This limit has been reached.

EDA18241 Return Code from DROP SYNONYM DATF MFD/ACX: (FOC%1)

The Return Code from DROP SYNONYM DATF MFD/ACX is listed in the error message.

EDA18242 FX DROP SYNONYM ERR.

Unable to DROP SYNONYM. Duplicate may exist, or a configuration error may be the problem.

EDA18243 CREATE SYNONYM executed inline for DATF: %1

CREATE SYNONYM executed inline for DATF.

EDA18244 Return Code from CREATE SYNONYM - DATF: (FOC%1)

Return Code from CREATE SYNONYM - DATF.

EDA18245 DUMMY SQL FAILURE

DUMMY SQLIN FAILURE.

EDA18246 DYNAM MOVE ERROR: %1

There was a Dynamic move error.

EDA18247 IBIRCP Master file move RETURN CODE = %1

Return code from internal ETL function. Usually a configuration or access error.

EDA18248 COMPFX DEFINE ERROR

COMPFX DEFINE ERROR.

EDA18249 Attempting to connect to %1 %2 database

Attempting to connect to relational CMSCHED database.

EDA18250 %1 %2 database connect successful

Connection to relational database was successful.

EDA18251 Failure connecting to %1 Unknown RDBMS

Failure to connect to Target table. The RDBMS is unknown.

EDA18252 CMCONNCT ERROR

EDA18253 Error determining last check point for request

Error determining the last check point for the request.

EDA18254 Unable No retrieve data from: %1

Unable to retrieve data from a file.

EDA18255 FOCERRNUM = %1 RETCODE = %2

The error number and return code are listed in the error message.

EDA18256 Successfully connected to agent CMLOG.

Successfully connected to CMLOG.

EDA18257 Attempting connect to agent CMJOB. ---->

Attempting to connect to CMJOB.

EDA18258 Returned successfully to agent CMLOG. <----

Returned successfully to CMLOG.

EDA18259 Successfully connected to agent CMJOB. ---->

Successfully connected to CMJOB.

EDA18260 Work completed inside agent CMJOB. <----

Work was completed inside CMJOB.

EDA18261 User not authorized for %1 delete: %2

The user does not have the authority to delete. Check the privileges of the user.

EDA18262 %1 DELETE ERROR

This user may not have permission to delete the log file. Check the permissions on this user.

EDA18263 %1: SINK MACHINE IS DOWN

The SINK Machine is down.

EDA18264 Please Specify a Deletion Date...

The deletion date for the log needs to be specified.

EDA18265 Rows older than %1 Deleted.

All rows older then the specify date have been deleted from the LOG.

EDA18266 Rebuild %1 file after the sink machine is brought down

The file will be rebuilt after the sink machine is brought down. This can not be done while the sink machine is sink running.

EDA18267 CMDELTA SYSCOL ERROR

There is a problem with SYSCOLUM. This could be a configuration error.

EDA18268 CMDELTA%1 -READ I/O ERROR

Error reading iWay. Disk I/O error internal to ETL Manager in CMDELTA.

EDA18269 CMDELTA2 STATS ERROR

Unable to read CMSTATS table in CMDELTA. Usually a configuration or security access error for the ETL Manager internal database.

EDA18270 No prior statistics records for delta date/time

There are no prior statistics records for delta date/time.

EDA18271 Prior record delta date/time : %1 at %2

The prior record delta date/time is listed.

EDA18272 Checking for request dependencies.

Checking to see if the request has any dependencies.

EDA18273 Continuous Thread... %1

There is a continuous thread to the procedure listed.

EDA18274 Out of continuous depends.....

There are no more dependencies for the ETL Request.

EDA18275 RETRIEVE DEPS ERROR

Error accessing ETL Manager internal database for dependencies. Usually a configuration or security access error.

EDA18276 (1 of 2) Unable to read %1 dependency parm file

There was an error while reading the dependency parameter file for one of the dependencies from the original ETL request.

EDA18277 (2 of 2) for Request %1 dependency %2

There was an error while reading the dependency parameter file for one of the dependencies from the original request.

EDA18278 *** Dependent Request Failed ***

The Dependent Request failed. See previous error messages in log file for reason.

EDA18279 DEPEND READ ERROR

Read I/O error establishing dependencies. Internal error for sequential I/O.

EDA18280 Dependency found: %1 (#%2)

A dependency to the original ETL Request was found.

EDA18281 DROP INDEX for %1 table %2

Dropping the INDEX for the table. This is usually done for INFORMIX tables.

EDA18282 RC from DROP INDEX: %1, table: %2, RDBMS code: %3

The return code from the DROP INDEX previously executed for the INFORMIX table.

EDA18283 DROP TABLE for %1, table: %2 executed

A DROP TABLE command was executed to drop the target table.

EDA18284 RC from DROP: %1, table: %2, RDBMS code: %3

The return code from the DROP target table command that was previously executed.

EDA18285 %1 Dropped and Re-Created

The table was dropped and re-created.

EDA18286 User not authorized to DROP %1: %2

The user does not have the authority to DROP the table. Check the privileges the user.

EDA18287 %1 DROP ERROR

The user is not authorized to perform the desired function. Check the privileges for the user.

EDA18288 Issuing CREATE for %1 %2 table

The CREATE TABLE command is being executed for the table.

EDA18289 Unable to determine iWay TEMP path using TEMPPATH for process

Unable to determine iWay TEMP path using TEMPPATH. Probably a configuration error. Check iWay START variables or allocations.

EDA18290 Resolving DM Server temporary space for CMJOB service

Trying to resolve the DM Server temporary space for the CMJOB service.

EDA18291 Temporary directory for CMLOG process follows on next line

Temporary directory for CMLOG process follows on next line.

EDA18292 Starting %1 procedure

Starting the FTP Procedure.

EDA18293 iWay temp path too long to for file transfer,shorten it w/vars

The iWay temp path that is set is too long for the file transfer. Use variables to shorten it.

EDA18294 Resolving current remote iWay server

Resolving current remote iWay server.

EDA18295 SQL EDA ? SERVER failed

Unable to determine the remote iWay server. The communication configuration file is incorrect or cannot be located.

EDA18296 Failed to find ":" in EMG file for iWay server

Failed to find ":" in EMG file for the sever.

EDA18297 Current remote iWay server = %1

The current remote iWay server is listed.

EDA18298 Unable to determine iWay remote server

Unable to determine remote iWay server. FTP technique is used. The iWay communication configuration file is incorrect or cannot be located.

EDA18299 Search for NODE/ENTITY in iWay CS file failed

Unable to determine remote iWay server. FTP technique is used. The communication configuration file is incorrect or cannot be located. Search for NODE/ENTITY in the CS file failed.

EDA18300 Unable to determine iWay communication sub-system

Unable to determine remote iWay server. FTP technique is used. The communication configuration file is incorrect or cannot be located. Unable to determine the communication sub-system.

EDA18301 Unable to determine remote host name/IP address

Cannot determine remote host/address. FTP technique is used. The configuration file cannot be found or is incorrect.

EDA18302 Dropping synonym for: %1

Dropping synonym for: &FTP_SQLGET.

EDA18303 Create synonym executed for: %1

A synonym has been created for the file listed.

EDA18304 Return Code from CREATE SYNONYM: (FOC%1)

The return code from the CREATE SYNONYM previously executed.

EDA18305 Retrieving MFD %1 from remote iWay server %2

Retrieving the Master File from the remote iWay server.

EDA18306 Remote iWay sub-server profile needs,SET FOCUS=ON,on 1st line

Remote iWay sub-server profile needs the command SET FOCUS=ON on the 1st line.

EDA18307 %1 SAVE : Failed to retrieve MFD from remote EDA server

CMCHECK SAVE FAILURE: Failed to retrieve MFD from the remote server.

EDA18308 Remote MFD was retrieved

The remote Master File Description was retrieved.

EDA18309 ***** IBIRCP return code = %1

The IBIRCP return code.

EDA18310 Creating %1 control file

Creating the control file.

EDA18311 Determining outcome of %1 transfer

Determining the outcome of the transfer.

EDA18312 Attempt to determine results of FTP failed

Attempt to determine results of FTP failed.

EDA18313 I/O FAILED for %1 HOLD file

Unable to determine remote iWay server. FTP technique is used. The communication configuration file is incorrect or cannot be located.

EDA18314 Possible status states (UNKNOWN/BAD/GOOD/CONFIRMED SIZE)

Possible status states (UNKNOWN/BAD/GOOD/CONFIRMED SIZE).

EDA18315 Status of FTP transfer: %1

This is the status of the FTP transfer.

EDA18316 FTP transfer failed or was not verified complete

FTP failed or was otherwise not complete. Log file was reviewed; confirmation file was not entirely correct or not found. Transfer may be in error.

EDA18317 Error opening DAT file: %1

There was an error opening the DAT file.

EDA18318 GETDAT/FOC: %1 RETRIEVAL

Problem accessing the CMSCHED table. Security or configuration error retrieving data from the internal tables.

EDA18319 NO Transforms -or- Error reading DAT file

There are NO Transforms, or there was an Error reading the DAT file.

EDA18320 Required pre-load file DAT: %1 not created

Internal error reading the internal tables for SQL statements and transforms.

EDA18321 Missing required DAT data file: %1

EDA18322 Substituted %1 name can't exceed 66 characters for custom

ETL Table name cannot exceed the 66 character limit for custom copy.

EDA18323 Using user specified allocation for bulk load control file

Using user specified allocation for bulk load control file.

EDA18324 Using standard allocation for bulk load log file

Using standard allocation for bulk load log file.

EDA18325 Using user specified allocation for bulk load log file

Using user specified allocation for bulk load log file.

EDA18326 Using standard allocation for bulk load stdout file

Using standard allocation for bulk load stdout file.

EDA18327 Using user specified allocation for bulk load stdout file

Using user specified allocation for bulk load stdout file.

EDA18328 Using CM built bulk load command file

Using CM built bulk load command file.

EDA18329 FX CREATE SYNONYM ERR

There was a CREATE SYNONYM ERROR, for one of the following reasons: ERRPUT failed when writing MFD/AFD; Synonym name too long; Syntax error; AFD cannot be overwritten as MFD does not exist; or MFD cannot be overwritten as AFD does not exist.

EDA18330 CHECK FILE FAILURE

CHECK FILE FAILURE.

EDA18331 CMCHECK SAVE FAILURE

CMCHECK SAVE FAILURE.

EDA18332 CMCHK2 RPT FAILURE

CMCHK2 RPT FAILURE.

EDA18333 COMPFX BUILD ERROR

COMPFX BUILD ERROR.

EDA18334 COMPFX BUILD FAILURE

COMPFX BUILD FAILURE.

EDA18335 FX SYSCOLUMN ERR.

COMPFX error. Error retrieving from SYSCOLUM catalog table.

EDA18336 Attempting to connect to target %1 database

Attempting to connect to target relational database.

EDA18337 Attempting to connect to source %1 database

Attempting to connect to source relational database.

EDA18338 Records older than %1 Deleted.

Records older than the date specified have been deleted from the log file.

EDA18339 %1 CREATE ERROR

The user does not have the authority to perform the desired function. Check the privileges for the user.

EDA18340 Ending %1 procedure

Ending the procedure.

EDA18341 Resolving current remote iWay host

Resolving current remote iWay host.

EDA18342 Search for HOST/IP in iWay CS file failed

Unable to determine remote iWay server. FTP technique is used. The communication configuration file is incorrect or cannot be located. Search for HOST/IP in the CS file failed.

EDA18343 Current remote iWay host = %1

The current remote iWay host is listed.

EDA18344 CREATE SYNONYM ERROR

There was an error issuing the CREATE SYNONYM command. Duplicate or server configuration error.

EDA18345 Creating %1 command file

The command file is being created.

EDA18346 Executing %1 command file

The command file is being executed.

EDA18347 Error writing DAT file: %1

Internal error reading the internal tables for SQL statements and transforms.

EDA18348 Error closing DAT file: %1

Error closing DAT file.

EDA18349 %1 RETRIEVAL ERROR

Problem accessing the CMSCHED table. Security or configuration error retrieving data from the internal tables.

EDA18350 Enter stored proc name for Job ID under Options

Enter a stored procedure name for the Job ID under Options.

EDA18351 %1: FAILURE IN LOAD OF %2 DETAILS

The procedure failed in the load of the table details.

EDA18352 Migration procedure configuration error.

There was an error during the Migration procedure. The Save file was not created.

EDA18353 Migration procedure load error: %1

There was an error during the Migration procedure. The load failed.

EDA18354 Migration procedure completed successfully.

The Migration procedure completed successfully.

EDA18355 ERROR ON %1

There was an error on the FUSCAT or SYSCOLUM table.

EDA18356 ERROR ON SYSKEYS.

Error obtaining information from SYSKEYS catalog table. Server configuration error.

EDA18357 Keys for tables of DBMS type: %1 are required

Keys for tables of DBMS type: "dbmstype" are required.

EDA18358 For New Target:Select Primary Key(s) from Target Setup Screen

Keys for tables of DBMS type: "dbmstype" are required. For New Target: Select Primary Key(s) from Target Setup Screen.

EDA18359 For Existing Target:Create table with keys and regen synonym

Keys for tables of DBMS type: "dbmstype" are required. For Existing Target: Create table with keys and regenerate the synonym.

EDA18360 Target table is missing required keys

Target table is missing required key.

EDA18361 * W A R N I N G: Target Table has no keys. *

Warning: Target Table has no keys.

EDA18362 * Depending on the relational system, this may *

Depending on the relational system, this may result in run-time errors below, or poor performance. Quick Copies allow specification of keys in the target window; Custom copies rely on the KEYS=value of the access (.acx) file. Please check the access file to ensure proper behavior.

EDA18363 * result in run-time errors below, or poor *

EDA18364 * performance. Quick Copies allow specification *

EDA18365 * of Keys in the target window; Custom copies *

EDA18366 * rely on the KEYS= value of the access (.acx) *

ICM18367 * file. Please check the access file to ensure *

EDA18368 * proper behavior. *

EDA18369 COMASTER ERROR

Error reading the COMASTER table used to examine iWay descriptions. Usually a configuration error.

EDA18370 Error: Target database keys not found

Keys were not found in the Target Database.

EDA18371 KEYS NOT FOUND.

Keys not found; Internal ETL Server error.

EDA18372 -- stats for target file: %1

Statistics.

EDA18373 Error accessing Target schema: table: %1, code: %2

There was an error accessing the target table schema.

EDA18374 Error in Safety Check DEFINE

Error in Master analyzer DEFINE statements. Internal error.

EDA18375 Error in Safety Check Report

Error in report function of Master analyzer. Internal error.

EDA18376 Incorrect file type %1

The file type is incorrect.

EDA18377 Column format %1 is not supported

Column format is not supported.

EDA18378 Setting for ORACHAR is: %1

The setting for ORACHAR.

EDA18379 Return Code from COMMIT: %1

The return code from a COMMIT to the RDBMS that was previously executed.

EDA18380 SQL COMMIT ERROR after target load

There was a SQL COMMIT error after loading the target table.

EDA18381 SET INSERTSIZE ERR: %1

Problem with INSERTSIZE. Internal ETL Server set error.

EDA18382 Error in DB2 FLOAT to DECIMAL Conversion

Error in Master analyzer DEFINE statements. Internal error. There was an error converting DB2 Float to Decimal.

EDA18383 Load routine executed

The Load routine has been executed.

EDA18384 Processing multi-segment request

Processing the multi-segment request.

EDA18385 Error in extracting maximum segment from CMMSKEYS

Error in extracting the maximum segment from CMMSKEYS.

EDA18386 Maximum segment from CMMSKEYS doesn't exist

The Maximum segment from CMMSKEYS does not exist.

EDA18387 Key must be selected for multi-segment load

Key must be selected for multi-segment load.

EDA18388 Key field name is too long; limit is 56 characters

Key field name is too long; limit is 56 characters.

EDA18389 Failure: Invalid ON MATCH setting: %1

Failure. There was an invalid ON MATCH Setting.

EDA18390 MATCH: Logic Error

MATCH logic generation error. Internal ETL Server error.

EDA18391 Failure: Invalid option setting for SET ERRORRUN: %1

Failure: Invalid option setting for SET ERRORRUN.

EDA18392 ERRORRUN: SET ERROR

ERRORRUN generation error. Internal ETL Server error.

EDA18393 MODIFY PARSING ERROR - Check transformation logic

MODIFY Parsing error. Should be accompanied by FOCUS Services errors.

EDA18394 MODIFY AND EDACOMMIT ERR.

MODIFY/Commit error.

EDA18395 EDA COMMIT ERROR.

Commit Error. Internal to ETL Server.

EDA18396 Return Code from SQLIN PURGE: %1

The Return code form SQLIN Purge.

EDA18397 SQLIN PURGE ERROR after target load

SQLIN Purge error after target load. MODIFY/Commit error.

EDA18398 CUSTOM PROC ERROR: %1

Custom procedure for loading not found.

EDA18399 Load ended prematurely with error code: (FOC%1)

Load ended prematurely with error code.

EDA18400 Target Load Error - FOC ERROR: %1

FOCUS error occurred during processing. Accompanied by FOCUS message.

EDA18401 CMUSERID: SYSCOLUM INIT ERROR.

CMUSERID: Syscolum init error.

EDA18402 CMUSERID: REMOTE B/E CONNECT ERROR.

CMUSERID: Remote B/E Connect error.

EDA18403 CMUSERID: CM FAILING ALL REMOTE CONNECTIONS.

CMUSER: CM failing all remote connections.

EDA18404 CMUSERID: REMOTE SERVER NAME MISSING (REMSERVE)

CMUSERID: Remote server name missing.

EDA18405 User not authorized to start scheduler

The user is not authorized to start the scheduler.

EDA18406 Data Migrator scheduler started

The Data Migrator scheduler has started.

EDA18407 User not authorized to stop scheduler

The user is not authorized to stop the scheduler.

EDA18408 Invalid syntax in TABLE NAME. Check "," and "="

Invalid Syntax in specification of target table name. Check equal signs and commas for valid positioning.

EDA18409 Table name is missing: Check syntax/supply required parameter

Invalid Syntax in specification of target table name. Check equal signs and commas for valid positioning.

EDA18410 Invalid naming convention for target table: CM/cm/SYS/sys

Invalid naming convention for target table: CM/cm/SYS/sys.

EDA18411 List of all copy requests and their descriptions

List of all copy requests and their descriptions.

EDA18412 Delete rows from the copy manager run time log table

Deleted rows from the copy manager run time log table.

EDA18413 Drop and re-create the copy manager run time log table

Drop and re-create the copy manager run time log table.

EDA18414 Drop and re-create the copy manager statistics table

Drop and re-created the copy manager statistics table.

EDA18415 Drop and re-create the copy manager check point table

Drop and re-create the copy manager check point table.

EDA18416 Refresh the list of iWay sub-servers

Refresh the list of iWay subservers.

EDA18417 Start Data Migrator scheduler

Starting the Data Migrator scheduler.

EDA18418 Stop Data Migrator scheduler

Stopping the Data Migrator scheduler.

EDA18419 Delete rows from this date forward

Delete rows from this date forward.

EDA18420 Statistics COMMIT failure

CMLOG stats. Error in start time MODIFY. Could be due to incorrect configuration or invalid security. CMSTATS table unavailable. COMMIT CMSTATS.

EDA18421 User specified data retrieval limit at %1 row(s)

The user specified data retrieval limit.

EDA18422 User specified load to skip %1 row(s)

The user specified the load to skip rows before loading.

EDA18423 Request Type : New Target with transformations

Request Type : New Target with transformations.

EDA18424 Columns Appearing : Source AND Transformations

Columns Appearing : Source AND Transformations.

EDA18425 Target Type : Data via PCHOLD

The Target Type is data via PCHOLD.

EDA18426 Bad target type detected. Error in ETL Client save possible

A bad target type was detected. Error in ETL Client save possible.

EDA18427 Request Design : FOCUS Companion

Request Design: FOCUS Companion.

EDA18428 User requesting data retrieval Non-Pass Through (NON-APT)

The user is requesting data retrieval Non-Pass Through (NON-APT)

EDA18429 Issuing PREPARE

A PREPARE statement was executed.

EDA18430 Warning. Non-zero EDA return code detected: RC = %1

Warning. A non-zero return code was detected.

EDA18431 Return Code from CREATE SYNONYM CMLOGMFD: (FOC%1)

Return Code from CREATE SYNONYM CMLOGMFD.

EDA18432 PREPARE successful.

PREPARE was successful.

EDA18433 PREPARE unsuccessful. Checking error codes

PREPARE was unsuccessful. Checking error codes.

EDA18434 Recordlimit Specified: Non-APT overrides Prepare.

EDA18435 Return code from PREPARE: (FOC%1)

The return code from the PREPARE.

EDA18436 Request Failed: Server Transfer Files must be PREPAREable

Request Failed: Server Transfer Files must be PREPAREable.

EDA18437 Request Failed

Request Failed

EDA18438 PREPARE FAILURE: %1

PREPARE FAILURE

EDA18439 Request will process data via Auto Pass Through (APT)

The Request will process data via Auto Pass Through (APT).

EDA18440 Request will process data via NON-Pass Through (NON-APT)

Request will process data via NON-Pass Through (NON-APT).

EDA18441 DROP SYNONYM executed: %1

The DROP SYNONYM was executed.

EDA18442 Return Code from DROP SYNONYM: (FOC%1)

The return code from the DROP SYNONYM previously executed.

EDA18443 CREATE SYNONYM executed: %1

The CREATE SYNONYM was executed.

EDA18444 Return Code from CREATE SYNONYM: (FOC%1)

The return code from the CREATE SYNONYM which was previously executed.

EDA18445 CREATE SYNONYM error

CREATE SYNONYM error. Duplicate or server configuration error.

EDA18446 Dataset name missing for %1 file

No data on extract, when data was expected. The Data set name is missing for the file.

EDA18447 Dataset name missing for %1 file %2

No data on extract, when data was expected. The Data set name is missing for the file.

EDA18448 Unsupported FORMAT: %1

CUSTMSG value. Unsupported target file format type.

EDA18449 HOLD format for load via EDA (FIXFORM)

Hold format for load.

EDA18450 HOLD format: %1

The HOLD format.

EDA18451 HOLD file will be created for output file named: %1

HOLD file will be executed. The Output file is named.

EDA18452 Failed to set remote destination: REMOTE DEST = %1

Failed to set remote destination. The remote destination is set.

EDA18453 Setting remote destination: REMOTE DEST = %1

Setting the remote destination.

EDA18454 REMOTE DEST MISSING?

The remote destination is missing.

EDA18455 Turning SQL translator optimization off

Turning SQL translator optimization off.

EDA18456 Return Code from HOLD file: (FOC%1)

The return code from the HOLD file.

EDA18457 No data returned from HOLD file extract

No data returned from HOLD file extract

EDA18458 DYNAM MOVE ERROR: CMLOGMFD

DYNAM MOVE ERROR.

EDA18459 IBIRCP Log master file move RETURN CODE = %1

Return code from internal copy function. Usually a configuration or access error.

EDA18460 DYNAM MOVE ERROR: CMSQLIN

DYNAM MOVE ERROR.

EDA18461 IBIRCP Access file move RETURN CODE = %1

Unable to determine remote iWay server. FTP technique is used. The communication configuration file is incorrect or cannot be located.

EDA18462 IBIRCP Master file move RETURN CODE = %1

Return code from internal copy function. Usually a configuration or access error.

EDA18463 %1 : Row(s) returned from HOLD file extract

The number of rows returned from the HOLD file extract.

EDA18464 Applying transformations to HOLD file

Applying transformations to HOLD file.

EDA18465 HOLD file executed. Output file named: %1

HOLD file executed. Output file named

EDA18466 Transform HOLD FILE error

Transform error on extract files. Flat File transformations.

EDA18467 %1 : Row(s) processed during transformations

Number of rows processed during transformations.

EDA18468 No rows returned from HOLD file during transformations

No rows returned from HOLD file during transformations.

EDA18469 No transformations applied to HOLD file

No transformations applied to HOLD file. No data on extract, when data was expected.

EDA18470 Message code from transform HOLD file: (FOC%1)

The message code from the transformation HOLD file.

EDA18471 Error in console report

Error in console report.

EDA18472 Blank RPC value

The RPC value is blank. User not authorized for desired function. Control of administrative limits is part of routine CMCON00.

EDA18473 Attempting to run Stored Procedure: %1

Attempting to run a Stored Procedure.

EDA18474 Procedure: %1 was not located. Error = %2

Stored procedure cannot load. Usually means that a user stored procedure was missing or spelled incorrectly. Check the specification in the Target Database Setup window and also the search paths for .fex or FOCEXEC files at your server.

EDA18475 Request Type : New Target

Request is a new target.

EDA18476 Request Type : Existing Target

The Request is an existing target

EDA18477 Request Type : Extract only

The Request type is Extract only.

EDA18478 Request Type : Unknown

The Request Type is unknown.

EDA18479 Columns Appearing : Transformations ONLY

The columns appearing are Transformations ONLY.

EDA18480 Target Type : Server Transfer File

The target type is Server Transfer File.

EDA18481 Target Type : Flat File for input into bulk load

The Target Type is Flat file for input into bulk load.

EDA18482 Target Type : Flat File

The Target Type is a Flat File.

EDA18483 Request Design : FOCUS Query

Request Design: FOCUS Query.

EDA18484 Request Design : Data Migrator

Request Design: Data Migrator.

EDA18485 PREPARE successful. Intermediate hold file not required.

The PREPARE was successful. An intermediate hold file is not required.

EDA18486 REQ_NAME cannot be blank

The ETL Request name can not be blank.

EDA18487 No Static Data for this request

There is no Static Data for this request.

EDA18488 No CMP Data for this request

There is no CMP Data for this request.

EDA18489 No Transform Data for this request

There is no Transform Data for this request.

EDA18490 Failure connecting to %1 table %2

Failure to connect to the relational table.

EDA18491 ******* Starting Request : %1 *******

Starting the Request.

EDA18492 Request author : %1

The Request Author.

EDA18493 Request run time UserID : %1

The User ID that the Request will use during run time.

EDA18494 Error reading last date/time CR was edited

Error reading last date/time CR was edited.

EDA18495 Request was last edited : %1 at %2

The time and day the last copy request was edited.

EDA18496 Request submitted for immediate execution (CMASAP)

Request submitted for immediate execution (CMASAP).

EDA18497 Request submitted from copy server scheduler

Request submitted from copy server scheduler.

EDA18498 Job did not pass restart/recovery validation

Job did not pass restart/recovery validation.

EDA18499 CANNOT READ %1.

Can not read the file. Template unavailable. Not used.

EDA18500 HOLD FILE LOAD FAILED

Processing of HOLD file failed.

EDA18501 Quick ETL Transforms valid only for FLAT/Server Tran Targets

Quick ETL Transforms valid only for FLAT/Server Tran Targets.

EDA18502 User specified OPTIONS file not found during CMPARMS

User specified OPTIONS file not found during CMPARMS.

EDA18503 Remote procedure %1 not found

CM_OVER custom settings used; procedure not found. Possible misspelling, or the search path is incorrect for stored procedures.

EDA18504 Remote procedure %1 failed

The remote procedure failed.

EDA18505 Loading target using existing user file %1

Loading target using existing user file.

EDA18506 ETL Request loaded 0 Rows

The ETL Request did not load any rows.

EDA18507 Failed?: 0 rows loaded or written

There were 0 rows loaded or written. The ETL Request could have failed.

EDA18508 ETL Request stopped after extraction by user

ETL Request stopped after extraction by user.

EDA18509 Run time error - ETL Request Failed

There was a run time error. The ETL Request failed. One possible reason is that the user is not authorized for desired function. Control of administrative limits is part of routine CMCON00.

EDA18510 User termination via KILL_RPC flag

ETL request was terminated because KILL_RPC was set in a stored procedure.

EDA18511 Recording statistics

The statistics are being recorded.

EDA18512 ETL job Return Code: %1

The ETL job return code.

EDA18513 RC text: %1

The return code text.

EDA18514 %1 : %2 accepted by target table

Rows accepted by target table.

EDA18515 %1 : %2 inserted into target table

Rows inserted into target table.

EDA18516 %1 : %2 processed by copy job

Rows processed by copy job.

EDA18517 %1 : %2 updated in target table

Rows updated in target table.

EDA18518 %1 : %2 deleted from target table

Rows deleted from target table.

EDA18519 %1 : %2 rejected due to format error

Rows rejected due to format error.

EDA18520 %1 : %2 rejected due to validation errors

Rows rejected due to validation errors.

EDA18521 %1 : %2 rejected due to no match

Rows rejected due to no match.

EDA18522 %1 : %2 rejected because duplicate exists

Rows rejected because a duplicate exists.

EDA18523 Only running procedures? (RPC_ONLY) : %1

Are procedures going to run only?

EDA18524 Job forced to stop processing? (KILL_RPC) : %1

The job was forced to stop processing.

EDA18525 Disconnecting CMJOB process. Returning to CMLOG.

Disconnecting from CMJOB process. Returning to CMLOG.

EDA18526 *** Starting %1 ETL Request Procedure ***

Starting ASAP ETL Request Procedure.

EDA18527 Aborted: STOP row LT START row OR alphanumeric value

The Stop value is less than the start value or is alphanumeric. The variables STARTAT, STOPAT must be passed to routine CMASAP as numeric strings.

EDA18528 ETL Request name (REQ_NAME) Cannot be Blank!

ETL Request cannot be found. The ETL Request name (REQ_NAME) cannot be blank.

EDA18529 Stop! Request not found for %1 : %2

ETL Request not found. Supply CM_AUTHOR if the request is not designed by the connect user ID.

EDA18530 Passing copy request parameters to start copy job

Passing copy request parameters to start copy job.

EDA18531 Error checking statistics

Log message retrieval error. CMLOG/CMJOB mismatch.

EDA18532 JOB ERROR I/O Error reading statistics

Incorrect job statistics posted.

EDA18533 ETL Request Submitted : %1/%2

ETL Request has been submitted.

EDA18534 ETL Request Failed : %1/%2

ETL Request has failed.

EDA18535 NO DATA ON EXTRACT.

No data on extract, when data was expected.

EDA18536 Statistics

The report is statistics.

EDA18537 ETL Srvr Log (details)

This is the ETL Server Log (details).

EDA18538 Job Monitor

This is the Job Monitor report.

EDA18539 ETL Log Delete Rows

The ETL Log Delete Rows report.

EDA18540 ETL Log Drop/Refresh

The ETL Log Drop/Refresh report.

EDA18541 Set Wait/Nowait

Set Wait/Nowait report.

EDA18542 Query Wait/Nowait

Query Wait/Nowait report.

EDA18543 Run Stored Procedure

This is the Run Stored Procedures report.

EDA18544 Load Migration Routines

This is the Load Migration Routines report.

EDA18545 Scheduler Log File

This is the Scheduler Log File report.

EDA18546 Scheduler Events

This is the Scheduler Events report.

EDA18547 ETL Manager DB2 database configuration

ETL Manager DB2 database configuration.

EDA18548 Target Type : %1

The Target Type is listed.

EDA18549 ETL Request Complete : %1/%2

ETL Request has been completed.

EDA18550 %1 Rollback forced for ALL transactions

Rollback forced for ALL Transactions.

EDA18551 %1 Starting to load data

Starting to load data.

EDA18552 Failed load from %1 file. Check if intermediate file was created

Failed load from HOLD file - Check if intermediate file was created.

EDA18553 Executing pre-extraction RPC %1

Executing one of the pre-extraction RPCs.

EDA18554 Executing post-extraction RPC %1

Executing one of the post-extraction RPCs.

EDA18555 Executing pre-load RPC %1

Executing one of the pre-load RPCs.

EDA18556 Executing post-load RPC %1

Executing one of the post-load RPCs.

EDA18557 Issuing CHECK FILE for target MFD: %1

Issuing CHECK FILE for target Master File description.

EDA18558 Failed: %1 rows extracted, %2 rows processed at load

The ETL Request failed. The number of rows extracted and processed at load.

EDA18559 To refresh only the recovery table (CMRESCOD) : EX CMDRPRES

To refresh only the recovery table execute the FEX CMDRPRES.

EDA18560 Checking if previous request has completed

Checking whether the previous request is complete.

EDA18561 ETL Request %1/%2 Not submitted

The ETL Request has not been submitted.

EDA18562 The previous request has not completed

The previous request is not complete.

EDA18563 There are %1 copy requests to restart

The number of copy requests to be restarted.

EDA18564 Error accessing %1 file %2

Error accessing EDAPRINT

EDA18565 %1: Failure in %2 define

There was a failure in the define.

EDA18566 Error obtaining Incomplete Requests

There was an error obtaining the incomplete requests.

EDA18567 There are no records to process, ending recovery

There are no records to process. Ending the recovery.

EDA18568 Error obtaining job name from %1 file

CMLOG stats. Error in start time MODIFY. Could be due to incorrect configuration or invalid security. CMSTATS table unavailable.

EDA18569 The request exceeded number of attempts

The request exceeds the number of attempts.

EDA18570 No commit information for ETL Request: %1/%2

There is no commit information for the ETL Request.

EDA18571 The load will start from the beginning

The load will start from the beginning.

EDA18572 No records found for restartable request in CMSTATS

There are no records found for restartable request in CMSTATS.

EDA18573 Read failed for last commit position

Read failed for last commit position.

EDA18574 Failed in %1 include for restarted request

Failed in CMSTATS include for restarted request.

EDA18575 Request didn't complete during previous EDASERVER run

The request didn't complete during the previous EDASERVER run.

EDA18576 Request didn't complete during previous EDASERVER run

The request didn't complete during the previous EDASERVER run.

EDA18577 Wake mode: Searching for Re-startable ETL Requests

Searching for re-startable ETL Request.

EDA18578 *** Killing job for the request %1 ***

The job is being killed.

EDA18579 User Id (USERID) Cannot be Blank!

ETL Request not found. The User ID can not be blank.

EDA18580 Job name (JOBNAME) Cannot be Blank!

ETL Request not found. The Job name can not be blank.

EDA18581 Stop! Job not found for the request %1

ETL Request not found. Supply CM_AUTHOR if the request is not designed by the connect user ID.

EDA18582 Job for the request: %1 Not killed

The job was not killed.

EDA18583 To refresh only the unique jobid table (CMJOBID) : EX CMDRPJID

To refresh only the unique jobid table execute the FEX CMDRPJID.

EDA18584 %1 COMMIT failure

Error in start time MODIFY. Could be due to incorrect configuration, invalid security, or unavailable table.

EDA18585 No features available for this ETL Server

There are no features for this server.

EDA18586 No Extract Transform Data for this request

There is no Extract Transform data for this request.

EDA18587 Expected answer set. No rows returned.

EDA18588 CMSUBMFD: Failure in source define.

EDA18589 %1: DYNAM ALLOCATE error for %2 DDNAME

There was an error allocating the data set.

EDA18590 %1: DYNAM COPYDD error for %2 DDNAME

There was an error copying the data set.

EDA18591 Using user-created control file for bulk load

EDA18592 Using user-created command file for bulk load

EDA18593 Using user-created data file for bulk load

EDA18594 Using standard allocation for bulk load command file

EDA18595 Using user specified allocation for bulk load command file

EDA18596 To stop job issue following command: edastart -kill %1

This command is used to kill the connection corresponding to the copy job being stopped.

EDA18597 ETL Server install finished for %1. Run %2 to verify tables

The ETL Server installation has finished for FOCUS. Run ADDTAB1 to verify new tables.

EDA18598 Load for restart will skip %1 row(s)

Restart from last commit point will skip rows before loading.

EDA18599 Record length for user file is %1

Value of record length for user input file.

EDA18600 Alias is too long; limit is 59 characters

Alias is too long. Limit to 59 characters.

EDA18601 Stat_Accept

Total transactions accepted

EDA18602 Stat_Nomatch

EDA18603 if they are populated with user created copy jobs.

Determining if the ETL Manager internal tables already exist, and if they are populated with user created copy jobs. Return codes and text that appear as a result of this test may be ignored if the ETL Manager internal tables have not yet been created.

EDA18604 Return codes and text that appear as a result of this test

EDA18605 May be ignored if the ETL Manager internal tables have not

EDA18606 yet been created.

EDA18607 Warning!

Warning!

EDA18608 The ETL Manager internal tables are not empty.

The ETL Manager internal tables are not empty. Running CMIVP will completely erase all copy requests, logs, and statistical information that currently exist. Are there backups of the tables? If not, contact your Database Administrator to create them.

EDA18609 Running CMIVP will completely erase all copy requests, logs

EDA18610 and statistical information that currently exist.

EDA18611 Are there backups of the (CMCONFIG,CMUSER,CMREQ,CMDATS) tables?

EDA18612 If not, contact your Database Administrator to create them.

EDA18613 To refresh only the log file table (CMLOG2) : EX CMDRPLOG

To refresh only the log file table (CMLOG2), execute CMDRPLOG.

EDA18614 To refresh only the statistics table (CMSTATS) : EX CMDRPSTA

To refresh only the statistics table (CMSTATS), execute CMDRPSTA.

EDA18615 To refresh only the check point table (CMCHKPNT) : EX CMDRPCHK

To refresh only the check point table (CMCHKPNT), execute CMDRPCHK.

EDA18616 To refresh only the serialization table (CMSERIAL) : EX CMDRPSER

To refresh only the serialization table (CMSERIAL), execute CMDRPSER.

EDA18617 To refresh only the functions table (CMGUISUB) : EX CMLODSUB

To refresh only the functions table (CMGUISUB), execute CMLODSUB.

EDA18618 To refresh only the transformations tab (ICMFNC) : EX CMDRPFNC

To refresh only the transformation table (ICMFNC), execute CMDRPFNC.

EDA18619 Otherwise...

Otherwise

EDA18620 Issue 'CMIVP FORCE' to override this warning.

Issue 'CMIVP FORCE' to override this warning.

EDA18621 Note: The userid that is running this procedure needs DROP,

The userid that is running this procedure needs DROP, CREATE, INSERT and DELETE privileges in the DBMS that will store the ETL Manager internal and ETL Request target tables.

EDA18622 CREATE, INSERT and DELETE privileges in the DBMS that

The userid that is running this procedure needs DROP, CREATE, INSERT and DELETE privileges in the DBMS that will store the ETL Manager internal and ETL Request target tables.

EDA18623 will store the CM internal and ETL Request target tables.

The userid that is running this procedure needs DROP, CREATE, INSERT and DELETE privileges in the DBMS that will store the ETL Manager internal and ETL Request target tables.

EDA18624 Note: Non-zero return codes for the DROPs are not critical as

Non-zero return codes for the DROPs are not critical, as the target tables may not yet exist.

EDA18625 the target tables may not yet exist.

Non-zero return codes for the DROPs are not critical, as the target tables may not yet exist.

EDA18626 The default DB2 DBSPACE is : %1

What the DB2 DBSPACE is defaulted to.

EDA18627 The sub-system ID (SSID) is : %1

What the DB2 Sub-SYSTEM ID (SSID) is defined to.

EDA18628 Searching the DATABASE where ETL Manager quick copies

With message ICM18629, checking to the target database where ETL Manager is to create quick copies to see if any already exist.

EDA18629 are to be created to see if any already exist.

With message ICM18628, checking to the target database where ETL Manager is to create quick copies to see if any already exist.

EDA18630 ********************* W A R N I N G **********************

********************** W A R N I N G ********************

EDA18631 The DATABASE where ETL Manager quick copies will be

With messages ICM18632 and ICM18633 the database where ETL Manager will create quick copies already exists. The following tables already exist in DB2.

EDA18632 created already exists

With messages ICM18631 and ICM18633 the database where ETL Manager will create quick copies already exists. The following tables already exist in DB2.

EDA18633 The following tables already exist in the following DB2

With messages ICM18631 and ICM18632 the database where ETL Manager will create quick copies already exists. The following tables already exist in DB2.

EDA18634 EXTREME CAUTION SHOULD BE EXERCISED!

Extreme caution should be exercised.

EDA18635 The CMIVP program is now terminating.

The CMIVP Program is now terminating. In order to proceed you must indicate how the existing DATABASE.TABLESPACE for ETL Manager quick copies should be handled.

EDA18636 Appname

An application name

EDA18637 User_ID

EDA18638 Appname

EDA18639 Message

EDA18640 DM Scheduler Log

EDA18641 bulkload: Connection for target not found.

The conection for the specified adaptor could not be found in the server configuration. Check the configuration.

EDA18642 DM Scheduler Log is empty

EDA18643 Dbms, Error

Rejected due to DBMS errors

EDA18644 Failure on DMSTART create. Return Code = %1

EDA18645 Failure on DMTERM create. Return Code = %1.

EDA18646 Failure on DMHRINP create. Return Code = %1.

EDA18647 Failure on DMINV create. Return Code = %1.

EDA18648 Failure on DMCOMP create. Return Code = %1.

EDA18649 Failure on DMORD create. Return Code = %1.

EDA18650 Failure on DMINVA create. Return Code = %1.

EDA18651 Failure on DMINVD create. Return Code = %1.

EDA18652 Failure on DMRPTS create. Return Code = %1.

EDA18653 Failure on DMREPS create. Return Code = %1.

EDA18654 Failure on DMSALE create. Return Code = %1.

EDA18655 Failure on DMHR create. Return Code = %1.

EDA18656 Failure on DMINV load. Return Code = %1.

EDA18657 The ETLINV table was created and loaded.

EDA18658 Attempting connect to agent CMLOG. ---->

Attempting to connect to agent CMLOG.

EDA18659 The ETLCOMP table was created and loaded.

EDA18660 Failure on DMORD load. Return Code = %1.

EDA18661 The ETLORD table was created and loaded.

EDA18662 Failure on DMSALE load. Return Code = %1.

EDA18663 The ETLSALE table was created and loaded.

EDA18664 Failure on DMHR load. Return Code = %1.

EDA18665 The ETLHR table was created and loaded.

EDA18666 All sample data successfully created.

EDA18667 Date is %1

The date is currently set to listed value.

EDA18668 DM statistics is empty.

EDA18669 Temporary directory for CMJOB process follows on next line

The temporary directory for the CMJOB process follows on the next line.

EDA18670 Creating mail file message

Creating the mail file message.

EDA18671 Sending mail file message

Sending the mail file message.

EDA18672 Creating mail file alert message

Creating the mail file alert message.

EDA18673 Remote OS not specified or unknown in CMRALLOC - Default MVS/TSO

Remote OS not specified or unknown in CMRALLOC - Default MVS/TSO .

EDA18674 Unable to Connect to Remote Server %1

Unable to Connect to Remote Server.

EDA18675 Error determining remote operating system

Error determining remote operating system.

EDA18676 Stat_Dbmserr

EDA18677 CPU, Time

EDA18678 CPU_Time

EDA18679 Maintain Error: %1 during %2 for %3

There was a maintain error.

EDA18680 Internal Error (%1). Code: %2

There was an internal error.

EDA18681 Row level statistics are not available for buik insert

EDA18682 available

EDA18683 CMH parse near %1

EDA18684 Performing update of static request info.

Performing update of static request information.

EDA18685 (CMY3999) FAILURE in post copy request processing

There was a failure in the post copy request processing.

EDA18686 Bulkload utility error code: %1

Check target and discard files.

EDA18687 CMGUISUB Dropped and Re-Created.

The table CMGUISUB has been dropped and recreated.

EDA18688 ETL Manager scheduler stopped

The ETL Manager scheduler has stopped.

EDA18689 Severe failure in cmstart/scheduler

SEVERE FAILURE IN CMSTART/SCHEDULER

EDA18690 Total Inserts Applied

All rows processed during load procedure.

EDA18691 Total Insert Applied.

One row processed during load procedure.

EDA18692 Inserts:

Number of rows inserted during load procedure.

EDA18693 row(s) loaded

Number of rows inserted during load procedure.

EDA18694 rows copied

Number of rows copied during load procedure.

EDA18695 row copied

One row copied during load procedure.

EDA18696 Rows successfully loaded

Number of rows successfully loaded during load procedure.

EDA18697 Row successfully loaded

One row successfully loaded during load procedure.

EDA18698 * Warning! Bulk load has not been successfully verified.

Warning! Bulk load has not been successfully verified.

EDA18699 * Setting %1 in active.

Setting BLKNOMSG is active.

EDA18700 * Contact Information Builders for NLS correction.

Contact Information Builder for NLS correction.

EDA18701 Bulk Insert active. INSERTSIZE = %1

EDA18702 User defined failure

EDA18703 %1

This is the flagged line. It will be written in the log file.

EDA18704 Columns by Procedure

EDA18705 Procedures by Column

EDA18706 Column

EDA18707 Synonyms by Procedure across Enterprise.

EDA18708 0 rows retrieved. Stop processing

EDA18709 0 rows retrieved. Continue processing

EDA18710 Path plus FOCUS target name is greater than 72 chars

EDA18711 Synonym Remarks

EDA18712 Failure: More then 1 table in TABLESPACE %1

More then one table exists in the TABLESPACE that was to be dropped during the quick copy process. Drop the TABLESPACE manually, or specify a different TABLESPACE for the copy request.

EDA18713 Synonyms by Procedure

EDA18714 Procedures by Synonym

EDA18715 Impact Analysis for %1

EDA18716 Usage

EDA18717 Adapter

EDA18718 Table Name or Dataset

EDA18719 Desription

EDA18720 Prior to Load

EDA18721 MQ Series remote Queue Manager/Name unspecified!

Either the queue manager or queue name is not specified for the remote MQ Series queue.

EDA18722 MQ Series local Queue Manager/Name unspecified!

Either the queue manager or queue name is not specified for the local MQ Series queue.

EDA18723 Procedure Name

EDA18724 Procedure Application Directory

EDA18725 MQ data has not arrived: QManager=%1,Name=%2

The local MQ Series queue for the corresponding queue manager and queue name has not yet been populated by the remote MQ Series server. This ETL job will continue to monitor the queue until either data arrives or the job is killed.

EDA18726 Synonym Application Directory

EDA18727 Remote MQSeries queue populated

EDA18728 Phase 2 MQ transfer/load complete. Attempting cleanup.

The second phase of the MQ Series copy job has ended with a zero return code. The copy job will now attempt to remove the temporary synonym and the data and MFD/metadata from the MQ Series queue.

EDA18729 Drop and re-create the copy manager serialization table

EDA18730 Drop and re-create the copy manager function library

EDA18731 Drop and re-create the copy manager recovery table

EDA18732 Drop and re-create the copy manager reusable functions

EDA18733 CMREL Error unknown release. IBIREL=%1,CMREL=%2

The release that ETL Manager is currently running on has not been certified.

EDA18734 I/O Error in CMSUBMFD. Unable to read hold file.

An I/O error has occurred. File name not exist, is open or corrupted.

EDA18735 Error: No data for fieldname of local MFD.

After applying virtual defines to the remote MFD an attempt was made to map the data to the local MFD with the new field names and failed.

EDA18736 ETL Manager Scheduler not configured.

When an iWay Server is configured for ETL, the server will automatically start the ETL scheduler. If the internal ETL tables have not been created yet, the scheduler will stop.

EDA18737 * Caution! Bulk load has not been successfully verified.

Caution! Bulk load has not been successfully verified.

EDA18738 Procedure by Synonyms across Enterprise

EDA18739 Processing multi-target request

Loading more than one target in a request.

EDA18740 Stop! No valid Targets found for %1: %2

There are no more targets left to process in a multi-target request due to errors.

EDA18741 %1 type %2 New Target

New target in multi-target request.

EDA18742 %1 type %2 Existing Target

Existing target in multi-target request.

EDA18743 Starting Load

Load procedure is starting.

EDA18744 Ending Load

Load procedure has ended.

EDA18745 Commit forced at: %1 for %2 row(s)

EDA18746 bulkload: Error bulk load version number missing: BLK_VERSION

The DBMS version number for the load utility has not been set. Check the ETL Client target configuration panel.

EDA18747 bulkload: Error, Host not supplied running in 'ndls -a' mode.

The Host parameter needs to be specified. Check the ETL Client target configuration setup panel.

EDA18748 bulkload: Error, Database not supplied running in ndls -a mode

The Database parameter needs to be specified. Check the ETL Client target configuration setup panel.

EDA18749 bulkload: Error, Userid/Password not supplied running in ndls -a

The UID/PSWD parameters need to be specified. Check the ETL Client target configuration setup panel.

EDA18750 bulkload: DBMS error code at execution

The attempt to start the bulkload failed. Check configuration. It is possible that environmental variables that point tot the DBMS bulkload facilities have not been configured.

EDA18751 bulkload: Error found in the results of the bulkload log file.

Review the log file for DBMS messages that indicate the specific error.

EDA18752 bulkload: Error, data file location unknown

The source data input file for the bulkload could not be located. If the location for this file was specified by the user, check that the location exists and is writable.

EDA18753 bulkload: Error, environmental variable $SYBASE has not been set

Set the environmental variable $SYBASE to locate the Sybase home directory.

EDA18754 bulkload: Error, unsupported platform for Sybase bcp bulk loader

The Sybase bulkloader, bcp, only runs on Windows platform.

EDA18755 bulkload: Error concatenating the command

EDA18756 bulkload: Parsing error

EDA18757 bulkload: Error getting master handle for target

The source master file description could not be located.

EDA18758 bulkload: Error getting master handle for source

The target master file description could not be located.

EDA18759 bulkload: Syntax ERROR

Error parsing bulkload parameters

EDA18760 Skipping %1 row(s) before starting load

User has specified a skip row setting or restart recovery is beginning after last COMMIT point.

EDA18761 Stopping load after %1 row(s) loaded.

User has specified a stop row setting.

EDA18762 Job ID: %1

EDA18763 Request %1%2 complete

EDA18764 ETL Request %1/%2 failed; RC = %3

EDA18765 Application Path was not found: request %1

Application Path was not found for ETL Request.

EDA18766 Request does not exist. Please refresh the list of requests.

EDA18767 Failed Request %1/%2. Skipping dependencies.

EDA18768 Migrate procedure failed

EDA18769 No path for CMSCHED DB to migrate

EDA18770 Error Message Undefined

EDA18771 Email sent to %1

EDA18772 Error to send email: connection failed: RC=%1

EDA18773 Error run deferred request %1

EDA18774 Deferred request %1 created

EDA18775 Incomplete Request %1/%2

EDA18776 ETL Request does not exist. Please refresh the list of requests.

EDA18777 Date_____Time

EDA18778 ETL_Server_Log_Messages

EDA18779 Request

EDA18780 Job_ID

EDA18781 Log is empty.

EDA18782 Error Message Undefined

EDA18783 Error Message Undefined

EDA18784 Error Message Undefined

EDA18785 Error Message Undefined

EDA18786 Error Message Undefined

EDA18787 Error Message Undefined

EDA18788 Data Migrator scheduler stopped.

EDA18789 Error Message Undefined

EDA18790 Error Message Undefined

EDA18791 Error Message Undefined

EDA18792 Error Message Undefined

EDA18793 Error Message Undefined

EDA18794 Error Message Undefined

EDA18795 Error Message Undefined

EDA18796 Error Message Undefined

EDA18797 Error Message Undefined

EDA18798 Error Message Undefined

EDA18799 Error Message Undefined

EDA18800 %1

User defined message text.

EDA18801 bulkload: Error append parameter is missing: ORA_APPEND

The APPEND parameter for the ORCACLE load utility has not been set. Check the ETL Client target configuration panel.

EDA18802 Warning: No Source Columns were seleted for Transformation

No columns from the source table were selected for transformation in this ETL request.

EDA18803 bulkload: Error, Transformation Fields List Incorrect

EDA18804 Warning: INput File Name %1 is too long

EDA18805 bulkload: Error, Trusted Connection is not supported

EDA18806 bulkload: Error, unsupported platform for RedBrick TMU

EDA18807 bulkload: Error, Database not supplied RedBrick TMU

EDA18808 %1: %2 rejected due to DBMS error

EDA18809 bulkload: Error, Unexpected node of non-field type encountered

EDA18811 Select List is Empty

EDA18812 Invalid Item in Select List

EDA18813 No Table Chosen

EDA18814 ON Clause is Empty

EDA18815 Invalid ON Clause

EDA18816 Invalid WHERE Clause

EDA18817 Invalid Item in GROUP BY Clause

EDA18820 DBMN Error Message Limit reached.

EDA18821 Warning: DBMS Message Limit is set, output might be truncated.

iWay Software