Reference: |
The FTP SREG service sets Special Registers (SREGs) on the FTP Server. This service is used only with the iWay FTP Server extension and FTP Server channel. The identified special registers are sent to the server using a SITE command. This facility is used when programming process flows for the Managed File Transfer capability of iWay Service Manager.
Note: This service has no meaning with non-iWay FTP servers and should not be used with non-iWay FTP servers.
To configure a FTP SREG service:
For a complete description of the configuration parameters that are available for the FTP SREG service, see FTP SREG Service Parameters.
For a complete description of the edges that are returned by the FTP SREG service, see FTP SREG Service Edges.
The following table lists and describes parameters for the FTP SREG service.
Parameter |
Description |
---|---|
Host Parameters | |
Host Name |
In this field, enter the DNS name (or IP address) of the FTP server that you wish to connect to. Use the host port if the standard port is not 21. |
Remote Port |
This is the port to connect to on the FTP site. Leave it blank for default port 21. |
User Name |
The name used as the valid user ID on the FTP server. |
Password |
The valid password for the FTP server. |
Account Name |
The valid account for the FTP server. |
Use Passive Command |
If set to true, the service uses a PASV command. Otherwise, it uses the PORT command. |
Timeout |
The timeout interval for socket in seconds. |
Retry Interval |
Retry interval in seconds (allows xxhxxmxxs format). You can omit or use 0 for no retry. |
Connection Retry |
This shows the number of attempted failed connections to the FTP server. |
SREGs | |
Type of variable |
This parameter shows the type of variable to be used (headers appear in emitted documents as header values).
|
SSL Parameters | |
Use SSL |
If set to true, the connection is secured using Secure Sockets Layer (SSL). |
Security Protocol |
This shows the type of security protocol to be used. The following list describes the options of the security protocol.
This field is not needed if Keystore is a SSL Provider. |
Secure Data Connection |
This is used to enable a secure data connection, for example, transfer data securely. It is used in conjunction with Secure Control Connection. |
Use 128-bit Encryption |
This parameter enforces the use of 128-bit encryption. |
SSL Security |
This parameter describes the FTP Server connection type. Select one of the following options:
|
Keystore File or Keystore Security Provider |
In this field, you can:
|
Keystore Password |
This field is used to enter the password to access Keystore file. This is not required if Keystore File or Keystore Security Provider is the name of a Keystore Security Provider. |
Keystore Type |
This field shows the type of the Keystore. It is not needed if Keystore File or Keystore Security Provider is the name of a Keystore Security Provider. |
The following table lists and describes the edges that are returned by the FTP SREG service.
Edge |
Description |
---|---|
success |
Operation completed successfully. |
fail_parse |
Failed to properly parse the input parameters of the service. |
fail_connect |
Failed to connect to FTP host for any one of the following reasons:
|
fail_operation |
Invalid parameters or other error. |
iWay Software |