Configuring the Adapter in Adapter Manager

How to:

Before configuring the adapter in Adapter Manager, you must first create a target using iWay Application Explorer. The target represents a connection to a back-end system. For more information on configuring targets and connections using Application Explorer, see the Application Explorer User's Guide.

You configure the adapter in the Adapter Manager console. The configuration process creates run-time connection and persistent data files within Adapter Manager.

The configuration process interrogates the Adapter Manager repository entries that were built when the target and connection were created using Application Explorer. The define adapter process creates the run-time repository based on the design-time repository.


Top of page

x
Procedure: How to Configure the Adapter

To configure the adapter:

  1. In the left pane of the Adapter Manager console, click Configuration, select Defines, and then click Adapters.

    The Adapter Defines pane opens, as shown in the following image.

    1. In the Name field, type the name of the adapter, for example, MyAdapter.
    2. In the Description field (optional), type a description of the adapter, for example, Sample Adapter.
  2. Click Add.

    The following pane opens where a value for iBSP URL is required in the Parameter Value field as shown in the following image.

  3. Type the iBSP URL, which is the location of the Adapter Manager repository, or accept the default, http://localhost:9000.
  4. Click Next.

    The following pane, which consists of four columns, opens as shown in the following image.

    The first column lists the parameter name, the second column provides drop-down lists where you can select a value for each parameter, the third column lists the parameter type, and the fourth column provides a description for each parameter.

    1. From the Adapter drop-down list in the Parameter Value column, select the iWay adapter.
    2. From the Target drop-down list, select the target corresponding to the adapter you configured in Application Explorer.
    3. To return an error document, select the Create Error Document check box (optional).
    4. To enable a persistent connection, select the Persist Connection check box (optional).
  5. Click Next.

    The target connection information displays that was previously configured in Application Explorer and the Logon pane.

    The first column lists the parameter name, the second column provides a value for each connection parameter, the third column lists the parameter type, and the fourth column provides a description for each parameter.

  6. Review the imported configuration and if you wish, modify or update the connection information.
  7. Click Finish.

    The adapter you configured, MyAdapter appears in the Adapter Defines list, as shown in the following image and displays the name of the adapter and a description (optional).


Top of page

x
Procedure: How to Modify or Update an Adapter Connection

To modify or update an adapter connection:

  1. From the Adapter Defines list, select the adapter you defined, in the previous procedure, MyAdapter.

    You are returned to the pane that displays the target connection information. You cannot change the name of the adapter or the target, but you can edit the connection information.

    1. After you modify the connection information, click Update Connection Properties.
    2. After you make changes or additions to the adapter target in Application Explorer, click Update Adapter Data.
  2. Click Save.


iWay Software