x

To verify that you have successfully installed, use the configuration that is created by the base installation. You can verify the installation by bringing up FOCUS, running a test procedure and exiting from FOCUS.

1. Log on to your UNIX or Linux operating system using the iadmin ID.
2. Start the FOCUS session with the appropriate path to the focus script.

   For example:

   /home/iadmin/ibi/srv77/foc/bin/focus

   You should now see the FOCUS command prompt >>.

3. Create the FOCUS sample files, using the following command.

   EX SAMPLTUT TUTORIAL=LEGACY,CMAPP=ibisamp

4. Execute the following test procedure at the FOCUS command prompt.

   TABLE FILE CAR
   PRINT COUNTRY CAR MODEL
   END

   You should now see the output from the report request in Hotscreen.

    PAGE     1                                            
                                                         
                                                         
   COUNTRY     CAR               MODEL                   
   -------     ---               -----                   
   ENGLAND     JAGUAR            V12XKE AUTO             
   ENGLAND     JAGUAR            XJ12L AUTO              
   ENGLAND     JENSEN            INTERCEPTOR III         
   ENGLAND     TRIUMPH           TR7                     
   JAPAN       DATSUN            B210 2 DOOR AUTO        
   JAPAN       TOYOTA            COROLLA 4 DOOR DIX AUTO 
   ITALY       ALFA ROMEO        2000 GT VELOCE          
   ITALY       ALFA ROMEO        2000 SPIDER VELOCE      
   ITALY       ALFA ROMEO        2000 4 DOOR BERLINA     
   ITALY       MASERATI          DORA 2 DOOR             
   W GERMANY   AUDI              100 LS 2 DOOR AUTO      
   W GERMANY   BMW               2002 2 DOOR             
   W GERMANY   BMW               2002 2 DOOR AUTO        
   W GERMANY   BMW               3.0 SI 4 DOOR           
   W GERMANY   BMW               3.0 SI 4 DOOR AUTO      
   W GERMANY   BMW               530I 4 DOOR             
   W GERMANY   BMW               530I 4 DOOR AUTO        
   FRANCE      PEUGEOT           504 4 DOOR

5. Enter FIN at the command prompt to exit FOCUS.

x

For current information about which adapters are supported:

1. Go to http://techsupport.informationbuilders.com.

   The Information Builders Technical Support home page opens.

2. In the Quick Links section on the right side of the page, click Supported Systems/Adapters.
   The Supported Systems and Adapters page opens.
3. Click the link for the release you want.

   The Supported Systems and Adapters page for that release opens.

4. Click the link for your platform.

   The support chart for that platform opens.