In this section: |
Maintenance (a service pack or hotfix) changes the contents of one or more of the standard FOCUS libraries. For instructions on installing a service pack, see Refreshing or Upgrading FOCUS With ISETUP.
This chapter describes how to install a hotfix. Hotfixes are made available for download from an Information Builders FTP Server.
How to: |
Customers using this procedure must receive notification from an Information Builders representative confirming that the desired maintenance has been placed on the FTP server and is ready to be received. This procedure requires basic working knowledge of site-specific FTP standards.
The following procedure describes the detailed dialog between TSO and the user.
Advanced FTP users may facilitate the process by using more efficient methods according to their site standards.
Prior to starting the download process, Information Builders must provide you with the name of the FTP site (referred to in this document as ftpsite), the name of the download directory (referred to in this document as downloaddirectory), and an FTP user ID and password. In the following instructions, the user ID that you use to log onto your z/OS system is referred to as tsouser, and the FTP user ID and password you received from Information Builders are referred to as ftpuser and ftppass:
USER: ftp
SYSTEM: EZA1450I IBM FTP CS V1R8
EZA1466I FTP: using TCPIP
EZA1456I Connect to ?
USER: ftpsite
Upon completion of the FTP process, the maintenance data set will be allocated with a one-month retention period, and the data set name will be prefixed by the TSO prefix defined in the TSO profile.
SYSTEM: EZA1554I Connecting to: ftpsite 38.117.185.171 port: 21. 220 Microsoft FTP Service EZA1459I NAME(ftpsite:tsouser): USER: ftpuser SYSTEM: EZA1701I >>> USER ftpuser 331 Password required for ftpuser. EZA1789I PASSWORD: USER: ftppass
Note: The password will not display. Press Enter to process it:
SYSTEM: EZA1701I >>> PASS
230 User ftpuser logged in.
SYSTEM: EZA1460I Command: USER: cd downloaddirectory SYSTEM: EZA1701I >>> CWD downloaddirectory 250 CWD command successful.
SYSTEM: EZA1460I Command: USER: lcd DOWNLOAD EZA1460I Command:
USER: ls SYSTEM: EZA1701I >>> PORT 172,19,1,40,28,7 200 PORT command successful. EZA1701I >>> NLST 150 Opening ASCII mode data connection for file list. EZA2284I MF_FOCUS_Hotfix_download_instructions.pdf EZA2284I HF01.ADABAS.LOAD.BIN EZA2284I HF01.DATACOM.LOAD.BIN EZA2284I HF01.FOCLIB.LOAD.BIN EZA2284I HF01.FOCM204.LOAD.BIN EZA2284I HF01.IDMS.LOAD.BIN EZA2284I HF01.IMS.LOAD.BIN EZA2284I HF01.TOTAL.LOAD.BIN 226 Transfer complete. EZA1460I Command:
In a subsequent step, you will have to issue a RECEIVE command for each file in order to convert it to a PDS, so be sure to keep a copy of this list available. (You will not need to RECEIVE the file containing the download instructions.)
USER: locsite PRI=5 SEC=10 RETPD=0 LRECL=80 BLKSIZE=3120 RECFM=FB CYL
SYSTEM: EZA1460I Command: USER: bin SYSTEM: EZA1701I >>> TYPE I 200 Type set to I.
SYSTEM: EZA1460I Command: USER: mget HF* SYSTEM: EZA1701I >>> TYPE A 200 Type set to A. EZA1701I >>> PORT 172,19,1,40,21,134 200 PORT command successful. EZA1701I >>> NLST HF* 150 Opening ASCII mode data connection for file list. 226 Transfer complete. EZA1701I >>> TYPE I 200 Type set to I. EZA2696I Mget HF01.ADABAS.LOAD.BIN (Yes|No|Quit|Stop prompting)?
USER: S SYSTEM: EZA1701I >>> PORT 172,19,1,40,21,140 200 PORT command successful. EZA1701I >>> RETR HF01.ADABAS.LOAD.BIN 150 Opening BINARY mode data connection for HF01.ADABAS.LOAD.BIN (892560 bytes). 226 Transfer complete. EZA1617I 892560 bytes transferred in 0.160 seconds. Transfer rate 5578.50 Kbytes/sec. . . . HF01.FOCLIB.LOAD.BIN (39902800 bytes). 226 Transfer complete. EZA1617I 39902800 bytes transferred in 5.990 seconds. Transfer rate 6661.57 Kbytes/sec. EZA1460I Command:
USER: quit SYSTEM: READY
You now have one or more sequential files, each starting with the qualifiers tsouser.DOWNLOAD.
For each tsouser.DOWNLOAD.HFnn.name1.name2.BIN file that was downloaded, execute the TSO RECEIVE command to convert it to a PDS:
Note: You must receive each file without the .BIN suffix:
RECEIVE INDSN(DOWNLOAD.HFnn.name1.name2)
where qualif is the high-level qualifier for your FOCUS production data sets.
The RECEIVE command will prompt you for the restore parameters needed to process the command. Enter:
DSNAME ('qualif.HFnn.name1.name2')
? PTF
The output should show HFnn, where nn is the number of the hotfix.
Information Builders |